HP MP4 Hardware Reference Guide HP MP4 Digital Signage Players - Page 20

CAUTION, Installing a SODIMM

Page 20 highlights

2. Pull the front of the access plate up, and lift it off the digital signage player. Figure 2-8 Removing the SODIMM access plate 3. Align the notched edge of the SODIMM with the tab in the socket. CAUTION: To prevent damage to the SODIMM, hold it by the edges only. Do not touch the components on the SODIMM, and do not bend the SODIMM. 4. Hold the SODIMM at approximately a 20-degree angle, and then press the SODIMM into the socket (1) until it is seated. Gently apply pressure to both the left and right edges of the SODIMM (2) until the retention clips snap into place. NOTE: A SODIMM can be installed in only one way. Match the notch on the SODIMM with the tab on the socket. Figure 2-9 Installing a SODIMM 5. Press the SODIMM down into the compartment. 14 Chapter 2 Hardware changes

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37

2.
Pull the front of the access plate up, and lift it off the digital signage player.
Figure 2-8
Removing the SODIMM access plate
3.
Align the notched edge of the SODIMM with the tab in the socket.
CAUTION:
To prevent damage to the SODIMM, hold it by the edges only. Do not touch the
components on the SODIMM, and do not bend the SODIMM.
4.
Hold the SODIMM at approximately a 20-degree angle, and then press the SODIMM into the
socket (1) until it is seated. Gently apply pressure to both the left and right edges of the
SODIMM (2) until the retention clips snap into place.
NOTE:
A SODIMM can be installed in only one way. Match the notch on the SODIMM with the
tab on the socket.
Figure 2-9
Installing a SODIMM
5.
Press the SODIMM down into the compartment.
14
Chapter 2
Hardware changes