HP MP4 HP MP6 Digital Signage Player - Page 18

Changing from Desktop to Tower Configuration

Get HP MP4 PDF manuals and user guides View all HP MP4 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Changing from Desktop to Tower Configuration The MP6 can be used in a tower orientation with the tower stand included with the computer. 1. Remove/disengage any security devices that prohibit opening the computer. 2. Remove all removable media, such as compact discs or USB flash drives, from the computer. 3. Turn off the computer properly through the operating system, then turn off any external devices. 4. Disconnect the power cord from the power outlet and disconnect any external devices. CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer. 5. Orient the computer so that its left side is facing down and place the computer firmly down into the stand. Figure 2-6 Placing the Computer on the Stand 6. Reconnect the external equipment, plug the power cord into a power outlet, and turn the computer on. NOTE: Ensure at least 10.2 centimeters (4 inches) of space on all sides of the computer remains clear and free of obstructions. 7. Lock any security devices that were disengaged when the computer cover or access panel was removed. 12 Chapter 2 MP6 Hardware Upgrades

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
Changing from Desktop to Tower Configuration
The MP6 can be used in a tower orientation with the tower stand included with the computer.
1.
Remove/disengage any security devices that prohibit opening the computer.
2.
Remove all removable media, such as compact discs or USB flash drives, from the computer.
3.
Turn off the computer properly through the operating system, then turn off any external devices.
4.
Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
Regardless of the power-on state, voltage is always present on the system board as
long as the system is plugged into an active AC outlet. You must disconnect the power cord to
avoid damage to the internal components of the computer.
5.
Orient the computer so that its left side is facing down and place the computer firmly down into
the stand.
Figure 2-6
Placing the Computer on the Stand
6.
Reconnect the external equipment, plug the power cord into a power outlet, and turn the computer
on.
NOTE:
Ensure at least 10.2 centimeters (4 inches) of space on all sides of the computer remains
clear and free of obstructions.
7.
Lock any security devices that were disengaged when the computer cover or access panel was
removed.
12
Chapter 2
MP6 Hardware Upgrades