HP MS214 Maintenance and Service Guide: HP Pro All-in-One ms218/219 - Page 38
Computer Setup—Exit, BIOS updates
UPC - 884962290279
View all HP MS214 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Table 4-5 Computer Setup-Boot (continued) HDD Group Boot Priority Specifies boot device priority within hard drives. Network Group Boot Priority Specifies boot device priority within bootable network devices. Computer Setup-Exit NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. Table 4-6 Computer Setup-Exit Option Description Exit Saving Changes Press Enter to exit saving changes. Exit Discarding Changes Press Enter to exit discarding changes. Load Setup Defaults Press Enter to load setup defaults. Discard Changes Press Enter to discard changes. Save Changes Press Enter to save changes. BIOS updates HP periodically releases system BIOS updates, which are available from the HP website. These updates often contain fixes for known issues in the BIOS. To find out whether a PC needs a BIOS update, compare the current BIOS version number against the latest version available for download. To determine the current BIOS version, you should perform the following steps: 1. Click Start, and then select Shut Down. 2. Select Restart, and then click OK. 3. When the first screen displays, press F10 to enter Setup. The BIOS revision number is listed on the Main menu. 4. Write down the current BIOS version that is listed. 5. To exit Setup, press Esc, select Yes, and then press Enter. 32 Chapter 4 Computer Setup (F10) Utility