HP Mini 102 Compaq Mini CQ10 Notebook PC and Compaq Mini 102 Notebook PC - Mai - Page 53
Hard drive, Solid-state drive, Remove the 4 Phillips PM3.0×3.0 screws
View all HP Mini 102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Hard drive 1. Remove the 4 Phillips PM3.0×3.0 screws (1) that secure the hard drive bracket to the hard drive. 2. Using the Mylar tab, lift the bracket (2) away from the hard drive. Reverse this procedure to install a hard drive. Solid-state drive To remove the solid-state drive: 1. Remove the 4 Phillips PM2.0×3.0 screws (1) that secure the solid-state drive bracket to the solid- state drive. 2. Lift the solid-state drive (2) to remove it. Reverse this procedure to install a solid-state drive. Component replacement procedures 45
Hard drive
1.
Remove the 4 Phillips PM3.0×3.0 screws
(1)
that secure the hard drive bracket to the hard drive.
2.
Using the Mylar tab, lift the bracket
(2)
away from the hard drive.
Reverse this procedure to install a hard drive.
Solid-state drive
To remove the solid-state drive:
1.
Remove the 4 Phillips PM2.0×3.0 screws
(1)
that secure the solid-state drive bracket to the solid-
state drive.
2.
Lift the solid-state drive
(2)
to remove it.
Reverse this procedure to install a solid-state drive.
Component replacement procedures
45