HP Mini 110-1032TU Service Guide - Page 83
Remove the 2 Phillips PM1.5×2.0 screws, Release the tape securing the WWAN antennas
View all HP Mini 110-1032TU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Remove the system board: 1. Release the tape securing the WWAN antennas (1). 2. Disconnect the following cables from the system board: (2) Display panel cable (3) Microphone cable (4) Speaker cable (5) WLAN cables (6) WWAN cables (select models only) 3. Remove the 2 Phillips PM1.5×2.0 screws (1) that secure the actuators for the power switch and wireless on/off switch to the system board. 4. Remove the actuators (2). Component replacement procedures 73
Remove the system board:
1.
Release the tape securing the WWAN antennas
(1)
.
2.
Disconnect the following cables from the system board:
(2)
Display panel cable
(3)
Microphone cable
(4)
Speaker cable
(5)
WLAN cables
(6)
WWAN cables (select models only)
3.
Remove the 2 Phillips PM1.5×2.0 screws
(1)
that secure the actuators for the power switch and
wireless on/off switch to the system board.
4.
Remove the actuators
(2)
.
Component replacement procedures
73