HP Mini 210-1040EZ HP Mini 2102, HP Mini 210, and Compaq Mini 210 - Maintenanc - Page 72
and the fan/heat sink assembly
View all HP Mini 210-1040EZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
4. Remove the fan/heat sink assembly (3). NOTE: Due to the adhesive quality of the thermal material located between the fan/heat sink assembly and system board components, it may be necessary to move the fan/heat sink assembly from side to side to detach it from the system board. NOTE: The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly and the system board each time the fan/heat sink assembly is removed: Thermal paste is used on the processor (1) and the fan/heat sink assembly section (2) that services it. Reverse this procedure to install the fan/heat sink assembly. 64 Chapter 4 Removal and replacement procedures
4.
Remove the fan/heat sink assembly
(3)
.
NOTE:
Due to the adhesive quality of the thermal material located between the fan/heat sink
assembly and system board components, it may be necessary to move the fan/heat sink
assembly from side to side to detach it from the system board.
NOTE:
The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink
assembly and the system board each time the fan/heat sink assembly is removed: Thermal
paste is used on the processor
(1)
and the fan/heat sink assembly section
(2)
that services it.
Reverse this procedure to install the fan/heat sink assembly.
64
Chapter 4
Removal and replacement procedures