HP Mini CQ10-514CA HP Mini 110 and Compaq Mini CQ10 - Maintenance and Service - Page 54
Remove the WWAN module, allows it to tilt up at a slight angle.
View all HP Mini CQ10-514CA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Remove the WWAN module: 1. Disconnect the WWAN antenna cables from the terminals on the WWAN module. NOTE: The number of WWAN cables varies, depending on the model. Note the labeling and position of the cables. Pull the antenna cables up and off the terminals. 2. Using a small Phillips screwdriver, remove the 2 module screws. This releases the module and allows it to tilt up at a slight angle. 44 Chapter 4 Removal and replacement procedures
Remove the WWAN module:
1.
Disconnect the WWAN antenna cables
from the terminals on the WWAN module.
NOTE:
The number of WWAN cables varies, depending on the model. Note the labeling and
position of the cables. Pull the antenna cables up and off the terminals.
2.
Using a small Phillips screwdriver, remove the 2 module screws. This releases the module and
allows it to tilt up at a slight angle.
44
Chapter 4
Removal and replacement procedures