HP Model 720 single-ended 4GB disk drive user notes (a1658-90664) - Page 2
Disk Drive User Notes
View all HP Model 720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
The software patches may be obtained from HP Customer Service. INSTRUCTIONS FOR HP-UX 9.05 and 9.07 After you have loaded HP-UX onto the drive, install the appropriate patches using /etc/update and reboot the system. INSTRUCTIONS FOR HP-UX 10.X After you have loaded HP-UX onto the drive, install the appropriate patches using swinstall and reboot the system. 4-GB (Single-ended) Disk Drive User Notes Refer to your workstation owner's guide or your disk drive installation guide for detailed information about installing your disk drive. During the installation procedure, you may have to change the SCSI ID of your disk drive. Refer to the appropriate illustration to set the SCSI ID jumpers to the desired SCSI ID. NOTICE: We recommend that you use SCSI ID 6 for your workstation's first hard disk drive, and SCSI ID 5 for the second hard disk drive. Minimum Software Requirements The 4-GB disk drive is fully operational with HP-UX Release 10.01 and later on Series 700 binary-compatible systems, although software patches may be necessary. At HP-UX Releases 9.05 and 9.07 this drive may be used as a non-bootable device. Please see the following table and the instructions on the last page of this document. HP-UX Version Patches - OS 9.05 PHCO_7461 9.07 N/A 10.01 PHKL_8904, PHKL_8329 10.10 PHKL_8906 10.20 PHKL_8908 Patches - Diags PHSS_7587 PHSS_7587 PHSS_7583 PHSS_7585 PHSS_7929 Part Number A1658-90664 Edition E1296 Printed in U.S.A. *A1658-90664*