HP Model 725/100 hp DDS-3 tape drive user's guide (a1658-90702) - Page 16
Preparing to Install a New DDS-3 Drive - sale
View all HP Model 725/100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Introduction Preparing to Install a New DDS-3 Drive The following information describes how to prepare the DDS-3 drive for installation. Tools Required The following tools are needed to install the DDS-3 drive: • #2 Phillips screwdriver • Small needlenose pliers • T10 torx wrench Verifying Kit Contents Verify that the kit contains one of each of the following: • DDS-3 drive (part number 0950-2650) and bezel. • Set of 4 screws (M4x6) • Power adapter cable • Set of two expansion brackets and four screws (M3x6 T10) (not included in all kits) • SCSI I/O cable • Static strap • HP DDS-3 Tape Drive User's Guide (A1658-90702) NOTICE: If any contents of your kit are missing, contact your sales representative. Operating System Support The HP DDS-3 drive supports HP-UX 10.01 and later. This drive requires patches PHSS_7894 (or equivalent replacement) for support of the Support Tools Manager, and patch PHSS_7583 (or equivalent replacement) for offline SCSI testing.. 1-6