HP Model 725/75 hp DDS-DC tape drive user's guide (a1658-90696) - Page 21
Preparing the System
View all HP Model 725/75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Introduction Preparing the System Perform the following steps to prepare the system for the DDS-DC drive installation: 1. Determine the existing SCSI-2 address settings currently in use on your system by completing the following steps. 2. If you are using HP-UX 9.X, enter the following at the prompt: /etc/ioscan RETURN After a few moments the ioscan utility lists all of the I/O devices it could find. If there is a SCSI DDS drive in the list, its listing appears similar to the following: H/W Path Description Status 2.0.1.3.0 tape drive ok(nnnnnnnn) If you are using HP-UX 10.X, enter the following at the prompt: /usr/sbin/ioscan RETURN After a few moments the ioscan utility lists all of the SCSI I/O devices it could find. The list appears similar to the following: 1-11