HP Model 735 9GB disk drive user notes (a1658-90693) - Page 2
NOTICE, Modify Configuration, Modify Volume Group Param, eters, 64MB or less, Physical Extent Size,
View all HP Model 735 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
NOTICE: When installing HP-UX 10.xx on the 9-GB drive, you may receive an HP-UX Install Utility Message Dialog with the following error reported: ERROR: The disk at address "x/x/x.x.x" requires more than the current limit of 2000 physical extents (of size 4 megabytes (MB)) to completely allocate all its available space (8676 MB). You must either increase the physical extent size or increase the limit for maximum physical extents for the volume group "vgxx". (See the "Modify Volume Group Parameters" screen.) Select Modify Configuration at the bottom of the messages dialog. At the next screen, select Modify Volume Group Parameters. At this screen you should change either the number of extents or the size of the extents. A greater number of extents uses more in-core memory, but results in less file fragmentation on the disk. We suggest the following: If your system has 64MB or less of system RAM, increase the value for Physical Extent Size. If your system has more than 64MB of system RAM increase the value for Maximum Physical Extents. The HP part numbers for this drive are A1658-60016 (spare) and A1658-69016 (exchange). J6 A0 A1 A2 A3 J2 No jumpers installed CAUTION Do NOTuse the jumper plugs for J2 on J6. You will damage the internal contacts LM SS SCSI B B ID Highest Priority 6 5 4 3 2 1 0 15 14 13 12 11 10 9 Lowest Priority 8 Seagate ST19171WD Disk Drive Jumpers