HP Model 735cL hp DDS-2 tape drive user's guide (a1658-90689) - Page 21
Preparing the System
View all HP Model 735cL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Introduction Preparing the System Perform the following steps to prepare the system for the DDS-2 drive installation: 1. Determine the existing SCSI-2 address settings currently in use on your system by completing the following steps:. 2. If you are using HP-UX 9.X, enter the following at the prompt: /etc/ioscan -d scsitape RETURN After a few moments the ioscan utility lists all of the SCSI I/O devices it can find. If there is a SCSI DDS drive in the list, its listing appears similar to the following: H/W Path Description Status 2.0.1.3.0 scsi ok(nnnnnnnn) If you are using HP-UX 10.X, enter the following at the prompt: /usr/sbin/ioscan -d stape RETURN After a few moments the ioscan utility lists all of the SCSI I/O devices it could find. The list appears similar to the following: H/W Path Description Status 2/0/1.3.0 tape HP C1533A 1-11