HP Model 744 Model A4268A FWD SCSI Adapter InstallationandService Guide - Page 19

Installing the FWD SCSI Adapter, Removing the Single Boar, d Computer

Get HP Model 744 - VME Workstation PDF manuals and user guides View all HP Model 744 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Installing the FWD SCSI Adapter e. Loosen the SBC's two captive screws with a small flat blade screwdriver. Depending on your configuration, you could have four captive screws - two on the SBC, and two on the expansion slot. If you have these four captive screws, you will need to remove all four. See Figure 2-1. Captive Screws Captive Screws Figure 2-1. Removing the Single Board Computer f. Push the ejector handles to the outside of the board and remove the SBC from the card cage, as shown in Figure 2-1. 2-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
Installing the FWD SCSI Adapter
2–3
e.
Loosen the SBC’s two captive screws with a small flat blade screwdriver. Depending
on your configuration, you could have four captive screws – two on the SBC, and
two on the expansion slot. If you have these four captive screws, you will need to
remove all four. See Figure 2–1.
Captive Screws
Captive Screws
Figure 2–1.
Removing the Single Boar
d Computer
f.
Push the ejector handles to the outside of the board and remove the SBC from the
card cage, as shown in Figure 2–1.