HP Model 755cL hp DDS-3 tape drive user's guide (a1658-90702) - Page 21
Preparing the System
View all HP Model 755cL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Introduction Preparing the System Perform the following steps to prepare the system for the DDS-3 drive installation: 1. Determine the existing SCSI-2 address settings currently in use on your system by completing the following steps. 2. Enter the following at the prompt: /usr/sbin/ioscan RETURN After a few moments the ioscan utility lists all of the SCSI I/O devices it could find. The list appears similar to the following: H/W Path Class Description bc 8 bc I/O Adapter 8/0 ext_bus GSC built-in Fast/Wide SCSI Interface 8/0.0 target 8/0.0.0 disk QUANTUM LPS1080WD 8/0.5 target 8/0.5.0 disk DEC DSP3210SW 8/0.6 target 8/0.6.0 disk DEC DSP3210SW 8/12 ba Core I/O Adapter 8/12/5 ext_bus Built-in SCSI 8/12/5.3 target 8/12/5.3.0 tape. HP C1537A 8/12/5.4 target 8/12/5.4.0 disk. SEAGATE ST3600N 8/12/5.6 target 1-11