HP Mp3130 HP L1619a smart attachment module - (English) User Guide - Page 48

To manage the projector using the on-screen menu, displayed in the on-screen menu. - projector manual

Page 48 highlights

Maintaining the System To manage the projector using the on-screen menu The projector's on-screen menu is described in detail in the projector manual. However, when you install an attachment module, certain new menu entries are displayed in the on-screen menu. New menu entries with module installed Quick choice Wireless Presenter Displays information needed by Wireless Presenter-to-Go so it can connect to the projector. Input Attachment module Shows the input signal from the current wired or wireless presenter. Setup Network Sets up TCP/IP settings for the wired network port. If the network uses a DHCP server, you must set only the DHCP option. Check with the network administrator. Wireless reset Resets all wireless network settings to default values (only for certain firmware versions). Help About the network Displays the current configuration of the wired and wireless network ports on the attachment module. The wireless configuration and certain wired settings must be changed using the Web interface. See "To manage the projector from the Web" on page 49. 48 User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

48
User’s Guide
Maintaining the System
To manage the projector using the on-screen menu
The projector’s on-screen menu is described in detail in the projector manual.
However, when you install an attachment module, certain new menu entries are
displayed in the on-screen menu.
New menu entries with module installed
Quick choice
Wireless Presenter
Displays information needed by Wireless
Presenter-to-Go so it can connect to the projector.
Input
Attachment module
Shows the input signal from the current wired or
wireless presenter.
Setup
Network
Sets up TCP/IP settings for the wired network port.
If the network uses a DHCP server, you must set
only the DHCP option. Check with the network
administrator.
Wireless reset
Resets all wireless network settings to default values
(only for certain firmware versions).
Help
About the network
Displays the current configuration of the wired and
wireless network ports on the attachment module.
The wireless configuration and certain wired
settings must be changed using the Web interface.
See “To manage the projector from the Web” on
page 49.