HP Nc4000 HP Compaq nc4010 Notebook PC - Maintenance and Service Guide - Page 83
Preparing the Notebook for Disassembly, Table 5-1, Disassembly Sequence Chart, Battery Pack
View all HP Nc4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Removal and Replacement Procedures Table 5-1 Disassembly Sequence Chart (Continued) 5.19 Speaker/microphone 5.20 Switch board 5.21 System board 5.22 Modem board 2 2 5 screws, 2 standoffs 2 5.3 Preparing the Notebook for Disassembly Before you begin any removal or installation procedures: 1. Shut down the notebook. If you are unsure whether the notebook is off or in Hibernation, turn the computer on and then shut it down through the operating system. 2. Disconnect all external devices connected to the notebook. 3. Disconnect the power cord. 4. Remove the battery pack. Battery Pack Spare Part Number Information Battery pack, 6-cell, 40-wH 315338-001 5. Remove the battery pack by following these steps: a. Turn the notebook upside down with the rear facing you. 5-4 Maintenance and Service Guide