HP Nc6400 Computer Setup - Page 11
Diagnostics menu, System Configuration menu - fan always on
View all HP Nc6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Diagnostics menu Select Hard Drive Self-Test options Memory Check To Do This Run a comprehensive self-test on any hard drive in the system or on any optional MultiBay hard drive. Run a comprehensive check on system memory. System Configuration menu Select Language (or press f2) Boot options Device configurations To Do This Change the Computer Setup language. ● Set f10 and f12 delay when starting up. ● Enable/disable CD-ROM boot. ● Enable/disable Floppy boot. ● Enable/disable internal network adapter boot and set the boot mode (PXE or RPL). ● Enable/disable MultiBoot, which sets a boot order that can include most boot devices in the system. ● Set the Express Boot Popup delay in seconds. ● Set the boot order. ● Swap the functions of the fn key and left ctrl key. ● Enable/disable USB legacy support. When enabled, USB legacy support allows ● A USB keyboard, mouse, and hub to work in Computer Setup even when a Microsoft® Windows® operating system is not loaded. ● The computer to start from bootable USB devices, including a hard drive, diskette drive diskette, or optical drive connected by a USB port to the computer or to an optional docking device (select models only). ● Select a parallel port mode: EPP (Enhanced Parallel Port), standard, bidirectional, or ECP (Enhanced Capabilities Port). ● Enable/disable BIOS DMA data transfers (select models only) ● Enable/disable the system fan when connected to an AC outlet. ● Enable/disable Intel or AMD PSAE Execution Disable. When enabled, the processor can disable some virus code execution, which helps to improve computer security. ENWW Diagnostics menu 7