HP Nc6400 Memory Modules

HP Nc6400 - Compaq Business Notebook Manual

Get HP Nc6400 - Compaq Business Notebook PDF manuals and user guides View all HP Nc6400 manuals
Add to My Manuals
Save this manual to your list of manuals

HP Nc6400 manual content summary:

  • HP Nc6400 | Memory Modules - Page 1
    Memory Modules User Guide
  • HP Nc6400 | Memory Modules - Page 2
    in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: May 2006 Document Part Number: 406746-001
  • HP Nc6400 | Memory Modules - Page 3
    Table of contents 1 Adding or replacing memory modules Adding a memory module to the expansion memory module slot 2 Upgrading a memory module in the primary memory module slot 6 2 Effects of increasing memory Index ...13 ENWW iii
  • HP Nc6400 | Memory Modules - Page 4
    iv ENWW
  • HP Nc6400 | Memory Modules - Page 5
    slot. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module. CAUTION Electrostatic discharge (ESD) can damage electronic components. Before beginning any procedure, ensure that you are discharged
  • HP Nc6400 | Memory Modules - Page 6
    through the operating system.) 3. Disconnect all external devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface. 6. Remove the battery from the computer. 7. Loosen the memory module compartment cover screw (1). 8. Lift the
  • HP Nc6400 | Memory Modules - Page 7
    that you do not bend the memory module. a. Align the notched edge (1) of the memory module with the tab in the memory module slot. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated
  • HP Nc6400 | Memory Modules - Page 8
    edges of the memory module, until the retention clips snap into place. 11. Align the tabs (1) on the memory module compartment cover with the notches on the computer. 12. Close the cover (2). 13. Tighten the memory module compartment cover screw (3). 14. Replace the battery. 4 Chapter 1 Adding or
  • HP Nc6400 | Memory Modules - Page 9
    15. Reconnect external power and external devices. 16. Turn on the computer. ENWW Adding a memory module to the expansion memory module slot 5
  • HP Nc6400 | Memory Modules - Page 10
    shut down the computer through the operating system.) 3. Disconnect all external devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface. 6. Remove the battery from the computer. 7. Remove the 3 keyboard screws. 8. Turn the
  • HP Nc6400 | Memory Modules - Page 11
    lift the top edge of the keyboard and tilt the keyboard over until it rests on the palm rest of the computer. 11. Remove the memory module from the memory module slot: a. Pull away the retention clips (1) on each side of the
  • HP Nc6400 | Memory Modules - Page 12
    that you do not bend the memory module. a. Align the notched edge (1) of the memory module with the tab in the memory module slot. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated
  • HP Nc6400 | Memory Modules - Page 13
    c. Press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. 13. Return the keyboard to its previous position. ENWW Upgrading a memory module in the primary memory module slot 9
  • HP Nc6400 | Memory Modules - Page 14
    14. Slide the 4 keyboard release latches to lock the keyboard. 15. Turn the computer upside down on a flat surface. 16. Replace the keyboard screws. 17. Replace the battery. 18. Reconnect external power and external devices. 19. Turn on the computer. 10 Chapter 1 Adding or replacing memory modules
  • HP Nc6400 | Memory Modules - Page 15
    random access memory (RAM) increases, the operating system increases the hard drive space reserved for the hibernation file. If you experience problems with hibernation after increasing memory, verify that the hard drive has enough free space to accommodate a larger hibernation file. To display the
  • HP Nc6400 | Memory Modules - Page 16
    12 Chapter 2 Effects of increasing memory ENWW
  • HP Nc6400 | Memory Modules - Page 17
    free space 11 hibernation file 11 K keyboard screws removing 6 replacing 10 M memory displaying free space 11 increasing 11 replacing memory modules 2, 6 memory module inserting 8 removing 2, 7 replacing 2, 6 upgrading primary 6 memory module compartment cover removing 2 replacing 4 ENWW Index 13
  • HP Nc6400 | Memory Modules - Page 18
    14 Index ENWW
  • HP Nc6400 | Memory Modules - Page 19
  • HP Nc6400 | Memory Modules - Page 20
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
Memory Modules
User Guide