HP Nc6400 Memory Modules - Page 12
Align the notched edge, To prevent damage to the memory module, be sure that you do not bend
View all HP Nc6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
b. Grasp the edge of the memory module (2), and gently pull the module out of the memory module slot. (To protect a memory module after removal, place it in an electrostatic-safe container.) 12. To insert a memory module: CAUTION To prevent damage to the memory module, be sure that you do not bend the memory module. a. Align the notched edge (1) of the memory module with the tab in the memory module slot. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated. 8 Chapter 1 Adding or replacing memory modules ENWW
b.
Grasp the edge of the memory module
(2)
, and gently pull the module out of the memory
module slot. (To protect a memory module after removal, place it in an electrostatic-safe
container.)
12.
To insert a memory module:
CAUTION
To prevent damage to the memory module, be sure that you do not bend the
memory module.
a.
Align the notched edge
(1)
of the memory module with the tab in the memory module slot.
b.
With the memory module at a 45-degree angle from the surface of the memory module
compartment, press the module
(2)
into the memory module slot until it is seated.
8
Chapter 1
Adding or replacing memory modules
ENWW