HP Nc8430 Memory Modules - Page 12
and gently pull, To protect a memory module after removal, place it in an
UPC - 882780828223
View all HP Nc8430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Adding or replacing memory modules 11. Remove the memory module from the memory module slot: a. Pull away the retention clips 1 on each side of the memory module. The memory module tilts up. Ä To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. b. Grasp the edge of the memory module 2, and gently pull the module out of the memory module slot. To protect a memory module after removal, place it in an electrostatic-safe container. 1-10 Memory Modules
1–10
Memory Modules
Adding or replacing memory modules
11. Remove the memory module from the memory module slot:
a.
Pull away the retention clips
1
on each side of the
memory module.
The memory module tilts up.
Ä
To prevent damage to the memory module, hold the
memory module by the edges only. Do not touch the
components on the memory module.
b.
Grasp the edge of the memory module
2
, and gently pull
the module out of the memory module slot.
To protect a memory module after removal, place it in an
electrostatic-safe container.