HP Neoware c50 HP Device Manager 3.8 User Manual - Page 184
you can use, ered-off, but you can still interact with the device. For example
View all HP Neoware c50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Advanced Tasks 2 Enter the MAC Address of the device to be added. 3 Select the Management Gateway that will connect with the device from the Neoware Management Gateway ID drop-down list. 4 Click OK to add the device. A new device will appear in the device tree with the name deviceX, where X is a number. This device will appear as powered-off, but you can still interact with the device. For example, you can use Send Task to send a new Imaging template to the device, or Wake on LAN to attempt to start up the device. 174 Adding Devices Using MAC Addresses
Advanced Tasks
174
Adding Devices Using MAC Addresses
2
Enter the
MAC Address
of the device to be added.
3
Select the Management Gateway that will connect with the
device from the
Neoware Management Gateway ID
drop-down
list.
4
Click
OK
to add the device.
A new device will appear in the device tree with the name
deviceX
, where
X
is a number. This device will appear as pow-
ered-off, but you can still interact with the device. For example,
you can use
Send Task
to send a new
Imaging
template to the
device, or
Wake on LAN
to attempt to start up the device.