HP Neoware e140 HP TeemTalk Terminal Emulator 7.0 User Manual
HP Neoware e140 - Thin Client Manual
View all HP Neoware e140 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Neoware e140 manual content summary:
- HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 1
HP TeemTalk Terminal Emulator 7.0 User Manual - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 2
the U.S. and other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 3
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; permission notice appear in supporting documentation, and that the name of M.I.T. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 4
THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. iv - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 5
HP TeemTalk Terminal Emulator 7.0 User Manual Table of Contents CHAPTER 1 Introduction 1 What is TeemTalk? 1 About This User's Manual 2 Overview of Contents 2 Terms & Conventions 4 Getting More Information 5 Technical Support 5 Contacting Us 5 CHAPTER 2 Getting Started 7 Introduction 7 Creating - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 6
of Contents vi Saving the Session Configuration 15 The Status Bar 16 CHAPTER 3 Host Connection 17 Introduction 17 Telnet Settings 19 TCP/IP Transport 21 SSH2 Transport 22 Making a Host Connection 22 Creating an Authentication Profile using a Password 23 Creating an Authentication Profile using - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 7
60 CHAPTER 8 Editing Options 63 The Edit Menu 63 Clipboard Options 65 CHAPTER 9 Printing 67 Print Screen 67 Emulation Printer Settings 68 Status 68 Settings 69 Advanced - System Printer 71 Advanced - Serial Device 72 Advanced - LPR 75 Advanced - File 77 CHAPTER 10 VT Series Emulations - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 8
Function Keys & Buttons 121 User Keys Mode 121 User Key Definitions 121 Default Definitions 122 Key String Treatment 122 Function Indicator 122 Key String Definition 122 Character Display Attributes 123 Setup Options 125 General Settings 125 Configuration Settings 128 Preferences 132 CHAPTER 12 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 9
145 Display Settings 148 Preferences 151 CHAPTER 13 IBM 3270 Display Emulation 155 Creating an IBM 3270 Display Emulation Session 155 Using the TeemTalk Session Wizard 155 Using the TeemTalk Emulator Window 156 IBM 3270 Emulation Capabilities 157 Keyboard Mapping 157 SysReq Key Support 159 Network - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 10
Using the TeemTalk Session Wizard 183 Using the TeemTalk Emulator Window 184 IBM 3287-1 Printer Support 185 Setup Options 186 Model Settings 186 National Settings 189 Print By Pass Settings 193 CHAPTER 15 IBM 5250 Display Emulation 195 Creating an IBM 5250 Display Emulation Session 195 Using the - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 11
Mode 200 Insert Mode 201 Display Direction 201 Cursor Position 201 Fax Image Support 201 Word Processing Mode 202 Text Display Options 203 Display Right-to-Left Error Codes 207 Setup Options 209 Model Settings 209 National Settings 211 Display Settings 215 Environment Variables 217 CHAPTER 16 IBM - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 12
237 Block Mode 237 ANSI Mode 238 The Rule Cursor 238 Keyboard Mapping 238 The Status Line 240 Setup Options 242 General Settings 242 Display Settings 244 Preferences 246 CHAPTER 18 Wyse Emulations 249 Introduction 249 Creating a Wyse Emulation Session 250 Using the TeemTalk Session Wizard 250 Using - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 13
File 273 CHAPTER 21 Command Line Options 275 Introduction 275 Session Configuration 276 Load Session File 276 Path for Language/Codepage Files to Both Host & Emulation 277 Enable Debug 277 Enable Debug Two-Way 278 Set Bitwise Debugging Flags 278 Window Appearance 279 Do Not Show Splash Screen 279 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 14
Bar 284 Remove Configuration Bar Items 284 Remove the Emulation Status Bar 284 Remove the Window Status Bar 284 Remove the Soft Buttons 284 Soft Button Levels Displayed 284 Emulation Workspace 285 Mouse Cursor Style 285 Reflection 4 Colour Support 285 APPENDIX A Programming Keys & Buttons - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 15
294 AT&T 4410 Virtual Key Names 295 DEC VT510 Virtual Key Names 296 HP 700-92/96 Virtual Key Names 298 IBM 3151 Virtual Key Names 300 IBM 311 Introduction 311 General 311 Telnet 312 AixTerm 312 Digital VT Emulation 313 HP 700/92 Emulation 313 IBM 3270 Emulation 313 IBM 5250 Emulation 313 IBM - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 16
Table of Contents Wyse 60 Native Emulation 315 Wyse 50, 50+, TVI 910, 925, 950, ADDS-A2, HZ 1500, Wyse PC-Term 316 Index 317 xvi - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 17
User Manual CHAPTER 1 Introduction This chapter introduces TeemTalk and describes the scope of this manual. What is TeemTalk? HP's TeemTalk host access software or Linux. TeemTalk enables desktops to emulate more than 30 different green screen terminals including IBM 3270, 5250, DEC VT, HP, and - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 18
User's Manual Overview of Contents This manual explains how to use TeemTalk version 7.0. It assumes you are familiar with the operating system in which you are running TeemTalk. Note that your version of TeemTalk may not support every emulation or feature described in this manual. This manual - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 19
Printing Describes the printing options supported by TeemTalk. Chapter 10: Printer Emulation Describes features of the IBM 3270 printer emulation. Chapter 15: IBM 5250 Display Emulation Describes features of the IBM 5250 display the TeemTalk startup configuration. About This User's Manual 3 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 20
definition. Appendix C: Product Specification Describes the level of support provided by each terminal emulation. The following terms and conventions are used in this manual: keys to press When you need to press two and move the mouse while keeping the button held down. 4 About This User's Manual - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 21
Current information about HP products including the latest software updates is available at: http://www.hp.com/support In addition, this user manual and other HP documentation is available at the HP web site for browsing or downloading. Contacting Us If you need to contact HP, use one of the - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 22
Introduction 6 Getting More Information - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 23
Emulator 7.0 User Manual CHAPTER 2 Getting Started This chapter describes the basic procedure for creating and running a session and describes various TeemTalk display features. Introduction This chapter describes how to use the TeemTalk Session Wizard to create a session configuration file, then - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 24
run. 3 Select the Transport method then click the Configure button to specify settings. SSH2 The SSH2 (Secure Shell) client/server protocol is used to encrypt and transmit data securely over a network, with authentication provided by a password and/or key. Refer to the section "SSH2 Transport - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 25
details. 4 Select the Connection type (currently only Telnet is supported) then click the Configure button to specify settings. 5 Select the required terminal emulation in the Emulation list box then click the Configure button to specify settings. VT Series Enables emulation of a suite of DEC VT - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 26
Getting Started IBM5250 Printer Enables emulation of the IBM 5250 printer. Refer to the chapter "IBM 5250 Printer Emulation" on page 221 and the section "Setup Options" on page 223. TA6530 Enables emulation of the Tandem TA 6530 terminal. Refer to the chapter "TA6530 Emulation" on page 235 and - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 27
information displayed in the Summary Session Information box is correct. If not, click the - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 28
configuration file while TeemTalk is running, run TeemTalk either by double-clicking on the TeemTalk icon displayed on the desktop, or from the Start menu by selecting All Programs > HP > HP to run TeemTalk and load the settings stored in the session configuration file mysettings.tts, you would enter - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 29
from the TeemTalk window using command line options as described in the chapter "Command Line Options" on page 275. Title Bar Menu Bar Configuration Bar Emulation Workspace Status Bar Emulation Status Line Soft Buttons Title Bar The title bar displays the name of the session currently being run - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 30
drop-down list boxes. Refer to the section "The Configuration Bar" on page 15 for more details. Emulation Workspace The emulation workspace is section "The Status Bar" on page 16 for more details. Soft Buttons A set of programmable soft buttons is displayed at the bottom of the TeemTalk window by - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 31
bar on and off. Attempts to make a host connection using the current Transport, Telnet and Emulation settings. On a successful connection this button performs a Disconnect from host when clicked. Enables you to select and configure the transport used to communicate with the host. Enables you to - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 32
Getting Started The Status Bar The status bar shows the status of various TeemTalk operations and enables you to switch between operating modes. You can remove the status bar from the TeemTalk window by selecting Status Bar on the Tools menu. This will toggle display of the status bar on and off. - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 33
HP TeemTalk Terminal Emulator 7.0 User Manual CHAPTER 3 Host Connection Introduction This chapter describes how to configure TeemTalk to communicate with the host. Host connection settings are specified using the Transport and Connection options which can be found in three locations: • TeemTalk - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 34
by a password and/or key. See "SSH2 Transport" on page 22. Serial For host communication requiring data to be sent sequentially, one bit at a time. See "Serial Transport" on page 31. The Connection setting specifies the host connection protocol. Currently only Telnet is supported. TeemTalk also - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 35
, select Connection > Telnet then select Configure Connection.... On the configuration bar, click the Configure Telnet button. Specify the settings required by the host using the options described below, then click the Connect button. Terminal Id Factory default: Depends on the selected terminal - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 36
Host Connection Send CR with Break Factory default: Unchecked This determines whether a Carriage Return is sent with a Telnet break packet. Send TM with Break Factory default: Unchecked This determines whether a Timing Mark is sent with a Telnet break packet. 20 Telnet Settings - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 37
connection using the TCP/IP protocol is made using the TCP/ IP Settings dialog which can be displayed using one of the following three methods: Session Wizard: In Step 1 set Transport to TCP/IP then click the Configure button. TeemTalk Window: On the Session menu, select Transport > TCP/IP then - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 38
a Host Connection The SSH2 (Secure Shell) client/server protocol is used to encrypt and transmit data securely over a network, with authentication provided by a password and/or key. A host connection using the SSH2 protocol is made using the SSH Settings dialog which can be displayed using one of - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 39
Host Connection To create an authentication profile using a password: 1 Select SSH2 Profile... on the Tools menu. 2 Click the Add button. 3 Enter a User name. The Profile name will automatically display the User name entered, but you can change it if required. Click Next >. SSH2 Transport 23 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 40
for authentication then click Next >. 5 Enter and confirm the password then click Next >. 6 Check the summary. If it is incorrect you can go back and make changes by clicking the < Back button, otherwise click Finish - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 41
Host Connection 7 To use the new profile, display the SSH2 Settings dialog (see "Making a Host Connection" on page 22) and select the name of the profile from the Authentication profile list box. SSH2 Transport 25 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 42
New Public Key To create an authentication profile using a new public key: 1 Select SSH2 Profile... on the Tools menu. 2 Click the Add button. 3 Enter a User name. The Profile name will automatically display the User name entered, but you can change it if required. Click Next >. 26 SSH2 Transport - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 43
Host Connection 4 Select Use a public key for authentication then click Next >. 5 Select Create a new key then click Next >. 6 Enter a Key filename. If necessary, check the Find a new seed prime number box. Click Next >. SSH2 Transport 27 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 44
Host Connection 7 Select either RSA algorithm or DSA algorithm then click Next >. 8 Enter and confirm the passphrase to use for your new key file then click Next >. 28 SSH2 Transport - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 45
authentication profile. The new profile will now be listed in the SSH2 Profile Settings dialog. To make use of your key you need to copy it on displayed in the new window. 12 Logon to your server using username and password. 13 In your home directory you need to have a sub-directory called - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 46
Host Connection 15 To use the new profile, display the SSH2 Settings dialog (see "Making a Host Connection" on page 22) and select the name of the profile from the Authentication profile list box. 30 SSH2 Transport - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 47
bar, select Serial in the Transport list box then click Configure Transport. Specify the settings required by the host using the options described below, then click the Connect button. Communications Port Factory default: COM3 This specifies the port used to communicate with the host. Serial - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 48
previous 7 bits add up to an odd number, and 0 if the previous 7 bits add up to an even number. Mark parity will set every eighth bit to 1 and Space parity every bit to 0. Word Length Factory default: 8 This option specifies the number of data bits sent for each transmitted character. Stop Bits - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 49
Host Connection Both XON/XOFF on transmitted & received data. Hardware RTS/CTS hardware flow control. Half Duplex Factory default: Unchecked The setting of this option determines whether keyboard entered characters are immediately displayed on the screen when transmitted to the host (otherwise known - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 50
in Step 2. TeemTalk Window: Select Auto Logon... on the Tools menu. To specify auto logon settings: 1 If an initiation string is required by the host when you first make a connection, check the Set initiation string box, enter the required characters in the Initiate with box (the Respond With box - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 51
(indicated by ). Selecting either of these will cause a dialog box to popup when logging on to the host prompting the user to enter a name or password, respectively. You can also delay the script response by 2 seconds by inserting Delay (2s) (indicated by ) or 0.255 seconds by inserting - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 52
Host Connection If you want to edit one of the script lines, select the line in the Script window then click Remove to send it to the edit boxes on the left. Make the change(s) then click Add to send it back to the script. Note that this will now be the last line of the script. 6 When the Script - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 53
HP TeemTalk Terminal Emulator 7.0 User Manual CHAPTER 4 Keyboard Configuration This chapter describes how to configure Emulation Keys list box in the Key Macro Settings dialog. The information in brackets in the + Insert. Special key functions supported by each terminal emulation can be - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 54
Configuration Defining Key Functions You can redefine the function of keys on the keyboard using the Key Macro Settings + Key Alt + Control + Key Alt + Control + Shift + Key The Key Macro Settings dialog can be displayed using one of the following methods: Session Wizard: Click on the Key - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 55
Keyboard Configuration The top right panel is used to display information about may be programmed into keys is determined by the 127 character limit per definition and the amount of memory available in your PC. The definition can contain key functions and control characters to be actioned as well - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 56
Keyboard Configuration You can clear the macro by clicking the Clear button. 3 Test the function definition by clicking the Play Macro button. 4 Specify how the macro is - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 57
Compose Character Sequences Keyboard Configuration Compose character sequences can be used to generate codes for characters not shown on your keyboard. The characters that can be composed depend on whether the terminal emulation is in National or Multinational character set mode. When the terminal - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 58
Keyboard Configuration abandoned and a second sequence to be started. An invalid compose character only be com- posed if the terminal emulation is in Multinational mode and the Character Set option is set to Multinational. • (Latin-1) indicates that the character can only be composed if the terminal - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 59
Keyboard Configuration COMPOSE CHARACTER SEQUENCES " quotation mark ¨ space # number sign + + ' apostrophe ' space @ commercial at a a or A A (Multinational) a a or A A or a A (National) [ opening bracket ( ( \ back slash / / or / < ] closing bracket ^ circumflex - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 60
Keyboard Configuration COMPOSE CHARACTER SEQUENCES Ä A umlaut Å A ring Æ A E diphthong Ç C cedilla È E grave É E acute Ê E circumflex Ë E umlaut Ì I grave Í I acute Î I circumflex Ï I umlaut Ñ N tilde Ò O grave Ó O acute Ô O circumflex Õ O tilde Ö O umlaut O E diphthong (DEC Multinat.) Ø O slash - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 61
Keyboard Configuration COMPOSE CHARACTER SEQUENCES ó o acute ô o circumflex õ o tilde ö o umlaut o e diphthong (DEC Multinat.) ø o slash ù u grave ú u acute û u circumflex ü u umlaut ÿ y umlaut NSP no break space (Latin-1) broken vertical bar (Latin-1) ¬ - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 62
Keyboard Configuration 46 Compose Character Sequences - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 63
HP TeemTalk Terminal Emulator 7.0 User Manual CHAPTER 5 Mouse Functions This chapter describes the functions assigned to the mouse buttons by TeemTalk, and how to redefine them. Default Mouse Functions You can - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 64
the functions of the mouse buttons when single or double-clicked on their own or in conjunction with modifier keys. The Mouse Action Settings dialog can be displayed using one of the following methods: Session Wizard: Click on the Mouse Actions... button in Step 2. TeemTalk Window: Select - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 65
released) which sets the bottom right corner of the rectangular area. Select Word This will select the word under the mouse cursor. Select Line This will select the entire line under the mouse cursor Copy Paste Copies the current selection and sends it to the host. Macro Actions a user-defined macro - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 66
a cursor select. Defining a Macro You can assign a macro to a mouse button or button and modifier key combination as follows: 1 In the Mouse Action Settings dialog select the Macro option from the drop-down list for the button or button and modifier key combination required. Click OK to close the - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 67
" on page 287, or selecting standard key functions in the Emulation Keys and Virtual Keys list boxes. (For more information about using the Key Macro Settings dialog, refer to the section "Defining Key Functions" on page 38.) 7 Click OK when you have finished. Defining a Macro 51 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 68
Mouse Functions 52 Defining a Macro - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 69
HP TeemTalk Terminal Emulator 7.0 User Manual CHAPTER 6 Soft Buttons Introduction This chapter describes how to use the soft buttons. A set of soft buttons are provided which can be programmed to perform a wide variety of functions when clicked. By default they are displayed at the bottom - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 70
buttons from the display either by selecting Windows > Soft Buttons from the View menu so that it is unchecked, or in the Soft Button Settings dialog by setting the Visible Levels option to 0. To re-display the soft buttons, either select Windows > Soft Buttons from the View menu so that it is - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 71
Soft Buttons The top right panel is used to display information about soft buttons that have been programmed and enables you to select them in order to edit or delete. The Title column displays the text that will appear on the soft button. An asterisk in the Lcl column indicates that the function - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 72
in a separate window, uncheck the Attached to the window option. 8 When you have finished defining soft button functions, click OK. 9 To save the soft button settings, select File > Save Session. 56 Defining Soft Button Functions - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 73
HP TeemTalk Terminal Emulator 7.0 User Manual CHAPTER 7 Display Attributes Introduction This chapter describes how to change the colours used in the emulation colour (e.g. underlined and green). This chapter describes how to use the Attributes dialog to specify the display settings you prefer. 57 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 74
colour palettes enable you to specify the colours for the selected Screen Element. You can select different colours for the palettes by clicking the Set Colour button. The Active Attribute options allow you to enable or disable the attributes assigned to text by default. For example, if you want - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 75
Element list box then uncheck the Underline (UL) option under Active Attribute. The Sample Text box is used to show how the attribute settings currently applied to the selected screen element will appear on the display. The Preferences list box enables you to select additional display options, some - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 76
option is checked, characters with the inverse attribute will have the text (foreground) colour swapped with that of the text cell (background). Swap Black/White Factory default: Unchecked When checked, anything that has the white attribute will be displayed as black, and vice versa. 60 Preferences - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 77
default: Unchecked Selecting this option will cause ANSI colour commands to be ignored. Colours Clear with Attributes Factory default: Checked The setting of this option determines whether the foreground and background colours are cleared to the default colours when an ANSI clear attributes command - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 78
will cause characters with the underline attribute to blink. Blink Column Separators Factory default: Unchecked Selecting this option will cause column separators to blink. Blink Foreground/Background Factory default: Unchecked Selecting this option will cause the foreground and background colours - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 79
HP TeemTalk Terminal Emulator 7.0 User Manual CHAPTER 8 Editing Options The Edit Menu This chapter describes how to use the editing options provided on the Edit menu. The Edit menu provides a range - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 80
only select text contained within the rectangular area defined by the start position (mouse button held down) which sets the top left corner, and the finish position (mouse button released) which sets the bottom right corner of the rectangular area. Refer to the chapter "Mouse Functions" on page 47 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 81
Clipboard Options Editing Options The Clipboard Options dialog is displayed by selecting Clipboard Options... on the Edit menu. Format Factory default: Text This setting determines the format in which data is copied. Selecting Text will enable a standard copy of selected text. Selecting Bitmap - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 82
Editing Options 66 Clipboard Options - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 83
HP TeemTalk Terminal Emulator 7.0 User Manual CHAPTER 9 Printing Print Screen This chapter describes the printing options supported by TeemTalk. Selecting Print Screen... in the File menu will display the standard Print dialog enabling you to specify printer settings. Clicking the Print button - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 84
Printing Emulation Printer Settings The Emulation Printer Settings dialog is displayed by selecting Emulation Printer... in the Tools menu. Status This tab indicate the current status of the printer and allows you to - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 85
Settings Printing Printer Method Factory default: Print to System Printer The following printer methods are to the section "Advanced - LPR" on page 75 for setup options. Throw page on close Factory default: Unchecked When this option is checked a form will be issued when closing the printer. This - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 86
Printing Close delay Factory default: 0 Specifies the time (in tenths of a second) to wait before buffers require flushing. Specifying a large value can avoid blocking. Output Character Set Factory default: Iso Latin-1 This determines the character translation used by the printer. PC Ansi Codepage - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 87
to Print to System Printer. Setup System Printer Clicking this button will display the standard Print dialog for specifying printer settings. Process CR/LF/FF Factory default: Unchecked When checked, a Carriage Return or Line Feed command will output a new line, and a Form Feed command will output - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 88
These options are available when the Printer Method option on the Settings tab is set to Print to Serial Device. Communications Port Factory default: COM3 Specifies the COM port to use for printer communication. Baud Rate Factory default: 9600 Specifies the connection speed in the range 110 to - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 89
previous 7 bits add up to an odd number, and 0 if the previous 7 bits add up to an even number. Mark parity will set every eighth bit to 1 and Space parity every bit to 0. Word Length Factory default: 8 This option specifies the number of data bits sent for each transmitted character. Stop Bits - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 90
receive new data. Process CR/LF/FF Factory default: Unchecked When checked, a Carriage new page. Extended string value for new line Factory default: \r\n You can specify an extended string ), \(0xHexadecimal). Extended string value for new page Factory default: \f You can specify an extended string - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 91
options are available when the Printer Method option on the Settings tab is set to Print to LPR. LPR Name Factory default: Unspecified Enter the name of the LPR/LPD driver to print to here. Extended string value LPR for Header Factory default: Unspecified You can specify an extended string value to - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 92
Feed command will output a new page. Extended string value for new line Factory default: \r\n You can specify an extended string value for a new or \(decimal), \(0octal), \(0xHexadecimal). Extended string value for new page Factory default: \f You can specify an extended string value for a new page - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 93
new print data. Selecting Append will add print data to existing file contents. Selecting User Defined enables you to define the mode using the User Defined Mode option. User Defined Mode Factory default: wb+ When Mode is set to User Defined, this enables you to specify the mode in which the file is - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 94
Feed command will output a new page. Extended string value for new line Factory default: \r\n You can specify an extended string value for a new or \(decimal), \(0octal), \(0xHexadecimal). Extended string value for new page Factory default: \f You can specify an extended string value for a new page - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 95
HP TeemTalk Terminal Emulator 7.0 User Manual CHAPTER 10 VT Series Emulations Introduction This Settings dialog: AIXTerm Provides compatibility with software designed to drive an X terminal using X Windows. Ansi BBS This emulation is a derivative of the ANSI device driver ANSI.SYS supplied - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 96
PCTerm Provides compatibility with software designed for the PC Term mode supported by DEC. VT52 and supports ASCII characters 0-127 (decimal). VT+HP220 This emulation is based on the VT500 terminal series and includes the HP function keys F1 - F8 (not user programmable). The terminal ID is set - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 97
Start menu, select All Programs > HP > HP TeemTalk Terminal Emulator > Session Wizard. 2 In configuration for future selection. 3 Select the Transport method then click the Configure button to specify settings. 4 Select the Connection type then click the Configure button to specify settings - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 98
the Session menu and select Emulation.... Set the emulation to VT Series. 4 You can configure the transport, connection and emulation settings by selecting the relevant Configure options in the Session menu. The options displayed by selecting Configure emulation are described in the section "Setup - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 99
referring to the Emulation Keys list box in the Key Macro Settings dialog, which is displayed by selecting Key Macros... on the Tools your keyboard using the VT virtual key names listed in the Key Macro Settings dialog. The illustrations on the following pages show where DEC VT510 keyboard - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 100
VT Series Emulations 84 Keyboard Mapping 101/102 Key Keyboard Layout Normal Mode F11 F12 F13 F14 PF1 PF2 PF3 PF4 HELP DO F17 F18 F6 F7 F8 FF1194 F20 F9 F10 F11 F12 DELETE BACKSPACE BREAK FIND INSERT HERE REMV SELECT PREV SCREEN NEXT SCREEN (SCRL) Alt + Num Lock toggles between Normal & - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 101
VT Series Emulations 101/102 Key Keyboard Layout DEC Mode Keyboard Mapping 85 F11 F12 F13 F14 PF1 PF2 PF3 PF4 HELP DO F17 F18 BREAK F6 F7 F8 FF1194 F20 F9 F10 F11 F12 DELETE BACKSPACE FIND INSERT HERE REMV SELECT PREV SCREEN SCNNREEEXXETTN Alt + Num Lock toggles between Normal & DEC mode. - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 102
VT Series Emulations The Status Bar Below the emulation workspace in the TeemTalk window is a status bar that indicates the status of various operations and provides buttons for switching between modes. The information displayed in the status bar depends on the current terminal emulation. 1 2 3 4 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 103
and pressing the Up or Down Cursor keys. It is possible to make the width of display memory larger than the width of the window by changing the Columns per page setting in the VT Series Settings dialog. When you want to view columns stored off-screen, you can scroll horizontally by holding - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 104
on the AT&T 4410 keyboard can be mapped to any key on your keyboard using the AT virtual key names listed in the Key Macro Settings dialog. This dialog is displayed by selecting Key Macros... on the Tools menu. Refer to the section "Defining Key Functions" on page 38 for details - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 105
you have finished defining the f-keys, press F7 to save the definitions and exit from the menu. If you want to exit without saving the settings, press F8. AT&T 4410 Emulation 89 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 106
of the following three methods: Session Wizard: In Step 1 set Emulation to VT Series then click the Configure button. TeemTalk Window: On the Session menu, select Emulation > VT Series then select Configure Emulation.... On the configuration bar, select VT Series in the Emulation list box then - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 107
Factory default: VT510 7-Bit This specifies the particular VT Series terminal to emulate. Select from the following: AIXTerm Provides compatibility with software designed to drive an X terminal using X Windows. Ansi BBS This emulation is a derivative of the ANSI device driver ANSI.SYS supplied - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 108
PCTerm Provides compatibility with software designed for the PC Term mode supported by DEC. VT52 and supports ASCII characters 0-127 (decimal). VT+HP220 This emulation is based on the VT500 terminal series and includes the HP function keys F1 - F8 (not user programmable). The terminal ID is set - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 109
of the specified terminal may be supported. Font Factory default: Courier New This enables you to specify the font to use for displaying characters. The available settings depend on the fonts installed on your system. Character set Factory default: Multinational This specifies the character - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 110
+ Alt + F3 Toggle between left-to-right and right-to-left typing. Multinational mode Factory default: Checked This option will only be available if the system is configured for a language that supports national replacement character sets. The setting of this option determines the type of character - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 111
to a maximum of 64. Note that the number of rows stored in memory is specified by the Buffer lines option. Buffer lines Factory default: 144 This option determines the number of text rows that are stored in memory. This can be set from 0 to 528 rows by default. The Display Rows option specifies the - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 112
that unchecking this option will cause the Answerback string to be deleted. Tertiary device attribute Factory default: Unspecified When TeemTalk is in VT420 mode (Emulation mode set to VT510 and Terminal ID set to VT420), this option enables you to specify the tertiary device attribute report that - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 113
Display Settings VT Series Emulations Cursor style Factory default: Block This enables you to specify how the text cursor is displayed. Select from Block, Underline, Static block, Static underline or None. Status line Factory default: Unavailable This option determines whether or not the 25th - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 114
When checked, this will cause a line feed command to be appended to every carriage return command received. Display controls Factory default: Unchecked The setting of this option determines whether received control codes are actioned or displayed. When checked, a representation of most control codes - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 115
and the cursor will move off-screen to the relevant line stored in memory. You can scroll the display to view the lines stored off-screen and pressing the Up or Down Cursor keys. Horizontal coupling Factory default: Unchecked The setting of this DEC VT mode option determines what happens when the - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 116
displayed. When unchecked, the display remains unchanged and the cursor moves off-screen to the relevant page stored in memory. Ignore nulls Factory default: Unchecked The setting of this option determines whether Null characters received from the host are actioned or ignored. Cursor moves right to - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 117
to the AIXTerm emulation. It enables you to switch between HFT (High Function Terminal) mode (default) and VT100 mode. Keyboard sends scan codes Factory default: Unchecked This applies to the DEC VT520 and VT PC-Term emulations. It determines whether keyboard scan codes or ASCII codes are sent to - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 118
the host on key press/release. Note that this cannot be selected at the same time as the Keyboard sends scan codes option. Auto resize Factory default: Unchecked This applies to the DEC VT520 emulation only. When this option is checked, the window size will automatically be adjusted each time the - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 119
at a time when the window becomes full. When checked, data will scroll up several lines at a time as determined by the Scroll rate setting below. Scroll rate Factory default: 24 This determines the number of lines that are scrolled when the Jump scroll option above is selected. 80/132 clears screen - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 120
font used in 132 column writing mode will be the same as that used in 80 column mode. Backspace = DEL Factory default: Unchecked The setting of this option determines whether or not a backspace command performs a delete. Tab Settings Clicking the Set Tabs... button at the bottom of the VT Series - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 121
, select All Programs > HP > HP TeemTalk Terminal Emulator > Session Wizard. 2 In the Session Name field, enter a unique name that will identify this session configuration for future selection. 3 Select the Transport method then click the Configure button to specify settings. 4 Select the Connection - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 122
section describes the procedure for creating an HP 700-92/96 emulation session from the set the connection method. 3 Display the Session menu and select Emulation.... Set the emulation to hp70092. 4 You can configure the transport, connection and emulation settings by selecting the relevant Configure - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 123
Reset function is mapped to the key combination Control + F7. Special key functions usually found on an HP 700-92/96 keyboard can be mapped to any key on your keyboard using the HP virtual key names listed in the Key Macro Settings dialog. The illustrations on the following pages show where HP - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 124
HP 700-92/96 Emulation 108 Keyboard Mapping 101/102 Key Keyboard Layout INSERT DELETE CLEAR CLEAR LINE LINE LINE PAGE F1 F2 F3 F4 SELECT SOFT HARD RESET RESET F5 F6 F7 F8 MENU UKEY DEFS USYST UKEYS INSERT HOME PREV MODE UP PAGE DELETE HOME NEXT CHAR DOWN PAGE SCR = Scroll (SCR - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 125
function key F12. The display memory can be divided into 2, 4, 6 or 8 pages using the Display pages option in the HP70092 Settings dialog (see "Setup Options" the function is selected. When you run the HP 700-92/96 emulation, the initial configuration of the buttons and function keys enable various - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 126
the HP 700-92/96 emulation. If the functions are changed while using the emulation, you can reassert them by pressing the F9 key (equivalent to the User System button acts as a toggle key, switching the mode on or off. The setting may be saved by selecting Save Session in the File menu. The F2 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 127
HP 700-92/96 Emulation Character mode. This saves you having to acted upon locally and are not transmitted to the host when Enter is pressed. Remote Mode - F4 The current setting of this button determines whether pressing an alphanumeric key causes a character to be sent to the host (remote) or - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 128
HP 700-92/96 Emulation Remote mode and Local mode. The setting display memory is full. Once enabled, it can only be disabled if this button or F6 key is pressed again, a reset is them. This is useful when you want column headings or instructions to remain on the display. To lock a specific number - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 129
HP 700-92/96 Emulation Display Functions - F7 This button and the F7 the screen as well as transmitted to the host. Note: If the XmitFnctn (A) option is selected in the HP70092 Settings dialog (see "Setup Options" on page 125 for details), the button and F7 key will not deactivate Display Functions - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 130
HP 700-92/96 Emulation Configuration Selection This set of functions is asserted by pressing the F9 key (equivalent to the User System key). This enables you to access three sets of function configurations. Device Control - F1 Clicking this button or pressing F1 will cause the Device Control - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 131
HP 700-92/96 Emulation To Ext Dev - F2 This toggle function determines whether data is pressing F6 will cause a copy of all lines from and including the cursor line to the last line in display memory to be sent to the printer. The cursor will move to the leftmost column on the next line when the - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 132
empty line between two blocks of data, the printer will perform a carriage return and line feed. Device Modes This set of functions is asserted by pressing the F9 key (equivalent to the User System key) then F1 and F1 again. Device Control - F1 Clicking this button or pressing F1 will cause the - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 133
HP 700-92/96 Emulation Note: This function does not take effect when the rate supported by the printer. Log Bottom remains activated until either this button or F3 is pressed again, Log Top is activated, a reset is performed, or the emulation is exited. Log Top - F4 When the display memory becomes - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 134
HP 700-92/96 Emulation Note: This function does not take effect when Memory Lock is activated. Margins, Tabs & Start Column This set of functions is asserted by pressing the F9 key ( equivalent to the User System key) then F2. These functions enable you to redefine the start column, set tabs, and - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 135
HP next line down (as long as InhEolWrp is not selected in the HP70092 Settings dialog (see "Setup Options" on page 125), and, in the case reset to column 1 by pressing F7 (this will also reset the right margin to column 80). Note: Margins are disregarded when data is transferred from display memory - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 136
HP 700-92/96 Emulation carriage return and cursor home), and insert when data is transferred from display memory to the host. The margins will be cleared when Format mode is enabled. Clr All Margins - F7 This function will reset both left and right margin settings so that the left margin is - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 137
Programming Function Keys & Buttons HP 700-92/96 Emulation User Keys Mode The keys F1 through F8 and their equivalent buttons can be programmed by the host or user to perform additional functions to those described earlier. The keys may be assigned a string of alphanumeric characters and/or - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 138
HP when the User Key Definition screen is exited. Key String Treatment Each f-key and button definition displayed in the User Key Definition keyboard-entered data. The default selection is T for all f-keys. To change this setting, use the Tab or Shift + Tab keys to move the cursor over the field - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 139
reset the f-key definitions to their default values if required by the application. Character Display Attributes The HP 700-92/96 emulation incorporates various display attributes that can be enabled either by host commands, or from the keyboard by the user. When an attribute or set can configure - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 140
HP 700-92/96 Emulation 1 Display the User Key Definition screen by pressing the keys Shift + F10 J K LMNOS 7 When you have finished, press F9 to exit from the User Key Definition menu, then F10 to enable the User Keys and display the defined attribute labels. 124 Character Display Attributes - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 141
Setup Options General Settings HP 700-92/96 Emulation The HP 700-92/96 emulation is configured using setup options in the HP70092 Settings dialog which can be displayed using one of the following three methods: Session Wizard: In Step 1 set Emulation to HP70092 then click the Configure button. - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 142
for displaying characters. Multinational mode Factory default: Checked This option will only be available if the system is configured for a language that supports national replacement character sets. The setting of this option determines the type of character set used to generate characters. When - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 143
enables characters from any keyboard nationality to be generated. Display pages Factory default: 4 In HP 700-92/96 mode the display area is 80 or 132 columns by 24 lines with 168 lines stored off-screen, giving a total display memory of 192 lines. This option enables you to specify whether display - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 144
HP 700-92/96 Emulation Configuration Settings XmitFnctn (A) Factory default: Unchecked This option determines whether escape sequences will also be sent to the terminal emulation. SPOW (B) Factory default: Unchecked The setting of the SPace OverWrite option determines whether or not keyboard entered - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 145
be transmitted a page at a time. Page data will either be from the beginning of display memory or from the current cursor position. InhHndShk (G) InhDC2 (H) Factory default: Unchecked The combined setting of these two options determine the type of handshaking used when blocks of data are transmitted - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 146
HP or modify mode), and the setting of these two options. The setting of these two options will have handshake will be used. Enq/ack pacing Factory default: Checked The setting of this option determines whether the Hewlett /XOFF handshaking. EscXfer Factory default: Unchecked This option determines whether - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 147
HP 700-92/96 Emulation When unchecked, escape sequences relating to the display are not sent to the printer. When checked, each line transferred to the printer will begin with an escape sequence to select the primary character set by the Scroll rate setting below. Scroll rate Factory default: 24 This - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 148
HP 700-92/96 Emulation Preferences Backspace = DEL Factory default: Checked The setting of this option determines whether a backspace command also performs a delete. Destructive backspace Factory default: Unchecked The setting of this option determines whether pressing the Backspace key will cause - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 149
HP 700-92/96 Emulation Start column Factory memory. This pointer will remain in display memory setting of this option may be temporarily redefined using one of the Margin/Tab/Col function keys. Refer to the section "Margins, Tabs & Start Column" on page 118 for details. Return definition Factory - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 150
preceded by a zero. For example, the decimal value of RS is 30, so this would be entered as _030. Typeahead enabled Factory default: Unchecked When TeemTalk is connected to an HP 3000, you normally have to wait for the host to send a prompt before you can enter new data at 134 Setup - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 151
the keyboard buffer and each time TeemTalk receives a prompt it will send a line of data to the host. Block mode also supports typeahead. Host prompt character Factory default: ^Q (i.e. DC1) Some hosts send a prompt character to the terminal to indicate that they are ready to receive the next line - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 152
HP 700-92/96 Emulation 136 Setup Options - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 153
HP TeemTalk Terminal Emulator 7.0 User Manual CHAPTER 12 IBM 3151 Emulation This chapter describes configuration for future selection. 3 Select the Transport method then click the Configure button to specify settings. 4 Select the Connection type then click the Configure button to specify settings - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 154
the Session menu and select Connection... to set the connection method. 3 Display the Session menu and select Emulation.... Set the emulation to IBM 3151. 4 You can configure the transport, connection and emulation settings by selecting the relevant Configure options in the Session menu. The options - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 155
by referring to the Emulation Keys list box in the Key Macro Settings dialog, which is displayed by selecting Key Macros... on the Tools your keyboard using the I51 virtual key names listed in the Key Macro Settings dialog. The illustrations on the following pages show where IBM 3151 keyboard - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 156
IBM 3151 Emulation 140 Keyboard Mapping 101/102 Key Keyboard Layout (DEF F) ESC RESET PR MSG BREAK F4 F1 F2 F3 Alt + F1 = RESET F5 P SCR S MSG S LINE F6 F7 F8 F9 MSG F11 F12 F10 LF RETURN SEND PRINT PRINT LINE HOLD INS LN DEL ER INP INSERT - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 157
dialog is not set to Mode. Insert mode is exited by pressing the Insert or Reset key. Field 3: HOLD SCREEN indicates that the Hold Screen key has been pressed to suspend screen update. Press Hold Screen again to enable screen update. INVALID KEY appears when you press an invalid key. KEYS - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 158
is also displayed when you try to insert a character or line in a screen already full when the Forcing insert option in the IBM 3151 Settings dialog is set to Off. If two or more messages are sent to a particular field, then the message with the highest priority will be displayed. Messages in - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 159
key from the keyboard. 1 Press the keys Shift + Esc. to display the Define F key line along the bottom of the screen. The line has two user-entry fields. The small first field specifies the F key to be defined, and the second field is where the programmed contents is entered and displayed - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 160
IBM 3151 Emulation Note that the function keys can store a maximum of 128 characters between them. When this number is reached or exceeded, field A will start blinking and any characters following the 128th character will be discarded. 5 Repeat steps 2 to 4 until you have finished defining function - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 161
one of the following three methods: Session Wizard: In Step 1 set Emulation to IBM 3151 then click the Configure button. TeemTalk Window: On the Session menu, select Emulation > IBM 3151 then select Configure Emulation.... On the configuration bar, select IBM 3151 in the Emulation list box then - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 162
only one viewport containing 24 or 25 rows and 80 columns. Model 31 supports up to three viewports (80 or 132 columns wide) and pass-through printing. Operating Mode Factory default: Echo The setting of this option determines how keyboard entered data is sent to the host and displayed on the - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 163
+ Alt + F3 Toggle between left-to-right and right-to-left typing. Ansi codepage Factory default: PC Multinational (437) This option specifies the character set used for display when the Character set option is set to PC Ansi. Each code page consists of two tables of characters. The first table - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 164
-to-right and right-to-left typing. Multinational mode Factory default: Checked The setting of this option determines the type of character set used to generate characters. When unchecked, National mode is active in which a character set specific to the selected keyboard nationality is used. When - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 165
columns 28 rows x 132 columns Note that the contents of the display will be cleared when you change the display format. Auto wrap Factory default: Checked The setting of this option determines what happens to the cursor and data sent to the display when the end of the current line is reached - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 166
cursor will move to the first position of the line after the next line when the Return key is pressed. Auto new line Factory default: Unchecked The setting of this option determines the effect of pressing the Return key. When unchecked, the Return key will generate a CR (carriage return) character - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 167
default: Unchecked This enables the copy commands to function in right to left display mode. Turnaround char Factory default: CR This option specifies the line turnaround character (LTC) that is generated when a Read command is received or one of the block data transmission - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 168
lines will move along, forcing characters at the end of the last line to be discarded. When set to Both, the function of the Line and Character settings will be enabled. Insert character Factory default: Space The setting of this option determines the effect of pressing the Insert key. When - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 169
line option and the cursor will move to the next unprotected line. When set to New Line, the result of pressing the Return key is determined by the setting of the Auto new line option. Send operation Factory default: Page The setting of this option determines the effect of pressing the Send and Send - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 170
IBM 3151 Emulation When set to Line, the contents of the current line will be sent to the host when Send is pressed, or the current page if Send Line is pressed. 154 Setup Options - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 171
HP TeemTalk Terminal Emulator 7.0 User Manual CHAPTER 13 IBM 3270 Display Configure button to specify settings. 4 Select the Connection type then click the Configure button to specify settings. 5 Select IBM3270 Display in the Emulation list box then click the Configure button to specify settings - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 172
the Session menu and select Connection... to set the connection method. 3 Display the Session menu and select Emulation.... Set the emulation to IBM3270 Display. 4 You can configure the transport, connection and emulation settings by selecting the relevant Configure options in the Session menu. The - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 173
3270 Display Emulation The IBM 3270 terminal emulation supports Extended Attribute mode which allows different representation of highlighted fields and permits host definition of text colours. (Note that you can modify colours using the Attribute Settings dialog, but they cannot be saved as colours - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 174
IBM 3270 Display Emulation 158 Keyboard Mapping 101/102 Key Keyboard Layout QUIT (ATTN) RESET (F13) NB SET FN EDIT MONO F1 (F14) (F15) (F16) F2 F3 F4 < > Generates Field Tab with Ctrl. < > ( ) (F17) (F18) RECRD PLAY F5 F6 (F19) (F20) F7 F8 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 175
command. The status line will display the following symbol when communicating with the operating system: Note: Not all TN3270E servers provide full support of the SysReq key. Network Virtual Terminal Mode Network Virtual Terminal (NVT) mode allows the operator to communicate in ASCII format with - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 176
will appear when input from the keyboard or mouse will not be accepted by the host (except Reset and SysReq). Symbols to the right of this will indicate the reason. Pressing the Reset key will remove some of these symbols from the status line. Note that the emulation includes typeahead capability - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 177
the host is ready. Indicates that a programming error in the data from the host has been detected, possibly due to incompatible application software. Press the Reset or SysReq key to remove this indicator and unlock the keyboard. Indicates that you must wait while the requested function is performed - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 178
Indicates whether the National (N) or Latin (L) character set is active when a code page that supports a bilingual keyboard is selected. Pressing the keys characters that are entered. Insert mode can be disabled by pressing the Reset or SysReq key, or by performing any action that sends data to the - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 179
status line to indicate the current typing direction: Close Key Push Mode Selecting the Symbol Swap option on the Display tab of the 3270 Display Settings dialog will cause text symbols such as round or angle brackets to be displayed the correct way round when typing right-to-left. If text - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 180
within the Push segment while typing in the field's natural direction. Bilingual Keyboard Support When a code page that supports a bilingual keyboard is selected, you can toggle between the National and Latin character set by pressing the keys Shift + - on the keypad. The character N or L will be - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 181
data. The Fn keys can store a total of 1500 keystrokes. A sequence of recorded keystrokes may be interrupted so that keystrokes can be entered manually before continuing with the recording or playback. Note that local Fn key functions cannot be recorded. The keys used to initiate recording and - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 182
may pause recording at any time to allow keystrokes to be entered manually when played back by pressing Pause. To continue recording, press Pause playback, select Single Step Macros on the Notice Board Settings tab of the 3270 Display Settings dialog. 1 Position the text cursor where the playback - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 183
Macros IBM 3270 Display Emulation If the recorded keystrokes included Pause, then playback will halt at that point to allow you to enter keystrokes manually. Press Play to resume playback from where you stopped typing. If you want to cancel during the playback operation, press the Quit key. 1 Press - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 184
function, you pressed an Fn key that does not have a keystroke assigned to it. Remedy: Press the Reset key. 9015 In communication mode, you pressed either the Quit or Pause key. Remedy: Press the Reset key. 9019 In Record or Play mode. While the Record/play pause indicator was displayed on the - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 185
Board either by pressing the keys Alt + F2, or by selecting the Notice Board Enabled option on the Notice Board Settings tab of the 3270 Display Settings dialog (see "Notice Board Settings" on page 181). When the Notice Board is enabled, pressing the Zoom key will toggle the display between full - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 186
screen data to a function key. Note that the 3270 Display Settings dialog has several options that determine whether this facility is enabled and data in the selected area is copied, or only data in user entry fields. See "Notice Board Settings" on page 181 for details. 1 Position the text cursor - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 187
the following three methods: Session Wizard: In Step 1 set Emulation to IBM3270 Display then click the Configure button. TeemTalk Window: On the Session menu, select Emulation > IBM3270 Display then select Configure Emulation.... On the configuration bar, select IBM3270 Display in the Emulation - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 188
settings with the E extension provide support for the following extended attributes (these are supported Factory default: Unchecked Check this box to enable support for the Telnet 3270 regime, otherwise it will be suppressed. Telnet 3270E Factory default: Unchecked Check this box to enable support - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 189
in use then TEST0. These values are preserved over power off, so the first connection of any given power on may not be TEST1. Assume that the start Unbind notification to the emulator. Responses Factory default: Unchecked Check this option to support positive and negative response handling. This - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 190
end of this section shows the default settings. National Codepage Settings Factory default: User Defined This specifies the type of national codepage to be used. Selecting User Defined will enable manual selection of the Codepage, Character Set and Character Set ID using the following options. SBCS - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 191
IBM 3270 Display Emulation SBCS / DBCS Character Set Factory default: SBCS 697 - DBCS 0 This is a numeric value specifying the character set to use. SBCS / DBCS Character Set ID Factory default: SBCS 37 - DBCS 0 This specifies character set ID. Font Factory default: Courier New This enables you to - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 192
IBM 3270 Display Emulation Default Language, Codepage & Character Set Settings Language English (US) English (UK) Belgian Canadian French Danish Finnish 836 837 37 835 424 803 838 875 880 1026 1025 870 870 870 871 420 Char Set 697 697 697 697 697 697 697 697 697 697 697 697 697 697 697 697 1172 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 193
IBM 3270 Display Emulation IBM EBCDIC Codepages Supplied Codepage 37 273 274 277 278 280 284 285 290 297 300 420 424 500 803 833 834 835 836 837 838 870 871 875 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 194
IBM 3270 Display Emulation Display Settings Monochrome Factory default: Depends on the terminal type By default the setting of this option will match the normal display characteristic of the particular IBM 3270 model selected. In TeemTalk, all terminal types support both monochrome and colour - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 195
When the rule is displayed in the emulation workspace, the setting of this option determines whether or not the rule follows the cursor when it moves. Numeral Swap Factory default: Unchecked When using a code page that supports a bilingual keyboard, this will cause all numbers to be displayed - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 196
IBM 3270 Display Emulation Keyboard Settings Keyboard Unlock Delay Factory default: 0 When the keyboard is unlocked by the host, this specifies a delay in milliseconds before characters are sent. Auto-repeat AID Keys Factory default: Unchecked This allows you to disable the auto-repeat key function - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 197
the other. Note that the host screen contains the same number of rows and columns whether displayed full screen or in split screen. Zoom Settings Factory default: Notice Board Above Host This determines whether the Notice Board is displayed above or below the host screen. When viewing the display - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 198
IBM 3270 Display Emulation F-Key Settings Factory default: Copy Only User Fields to F-Key Selecting Copy Only User Fields to F-Key will enable only data contained in user entry fields in the selected area to be copied to a function key. Selecting Copy All Data to F-Key will enable all screen data in - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 199
HP TeemTalk Terminal Emulator 7.0 User Manual CHAPTER 14 IBM 3270 Printer Configure button to specify settings. 4 Select the Connection type then click the Configure button to specify settings. 5 Select IBM3270 Printer in the Emulation list box then click the Configure button to specify settings - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 200
the Session menu and select Connection... to set the connection method. 3 Display the Session menu and select Emulation.... Set the emulation to IBM3270 Printer. 4 You can configure the transport, connection and emulation settings by selecting the relevant Configure options in the Session menu. The - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 201
IBM 3270 Printer Emulation TN3287 printing is supported by setting the Model option in the 3270 Printer Settings dialog to IBM-3287-1. When a new Telnet connection is made, the screen will display a message data being sent but will not disconnect you from the host. IBM 3287-1 Printer Support 185 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 202
the following three methods: Session Wizard: In Step 1 set Emulation to IBM3270 Printer then click the Configure button. TeemTalk Window: On the Session menu, select Emulation > IBM3270 Printer then select Configure Emulation.... On the configuration bar, select IBM3270 Printer in the Emulation - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 203
will suppress Telnet 3270 regime support. Telnet 3270E Factory default: Unchecked Selecting this option will suppress TN3270E support. LU Connect Name Factory default: Unspecified This specifies the if already in use then TEST0. These values are preserved over power off, so the Setup Options 187 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 204
IBM 3270 Printer Emulation first connection of any given power on may not be TEST1. Assume that the image and Unbind notification to the emulator. Responses Factory default: Unchecked When this is selected, positive and negative response handling is supported. It allows the server to reflect to the - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 205
end of this section shows the default settings. National Codepage Settings Factory default: User Defined This specifies the type of national codepage to be used. Selecting User Defined will enable manual selection of the Codepage, Character Set and Character Set ID using the following options. Setup - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 206
the codepage to use. SBCS / DBCS Character Set Factory default: SBCS 697 - DBCS 0 This is a numeric value specifying the character set to use. SBCS / DBCS Character Set ID Factory default: SBCS 37 - DBCS 0 This specifies character set ID. Font Factory default: Courier New This enables you to specify - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 207
IBM 3270 Printer Emulation Default Language, Codepage & Character Set Settings Language English (US) English (UK) Belgian Canadian French Danish Finnish 836 837 37 835 424 803 838 875 880 1026 1025 870 870 870 871 420 Char Set 697 697 697 697 697 697 697 697 697 697 697 697 697 697 697 697 1172 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 208
IBM 3270 Printer Emulation IBM EBCDIC Codepages Supplied Codepage 37 273 274 277 278 280 284 285 290 297 300 420 424 500 803 833 834 835 836 837 838 870 871 875 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 209
default: Specify Sequence You can select from the following print bypass methods: Specify Sequence, Count in Header or End on Non-Hex. End Sequence Factory default: Unspecified When the print bypass method is set to Specify Sequence, this enables you to specify the end sequence. Setup Options 193 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 210
no end sequence is specified, the bypass is assumed to be for a single pair of characters only. Length of End Sequence Factory default: 0 When the print bypass method is set to End on Non-Hex, this enables you to specify the number of characters in the end sequence. The bypass will terminate - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 211
HP TeemTalk Terminal Emulator 7.0 User Manual CHAPTER 15 IBM 5250 Display Configure button to specify settings. 4 Select the Connection type then click the Configure button to specify settings. 5 Select IBM5250 Display in the Emulation list box then click the Configure button to specify settings - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 212
the Session menu and select Connection... to set the connection method. 3 Display the Session menu and select Emulation.... Set the emulation to IBM5250 Display. 4 You can configure the transport, connection and emulation settings by selecting the relevant Configure options in the Session menu. The - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 213
connection to an IBM AS/400, System/ 36 or System/38. Monochrome (green/white plus attributes) and colour is supported. Colours may be modified using the Attribute Settings dialog. A typeahead capability is provided so that you can continue to enter data without waiting for a prompt from the host - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 214
IBM 5250 Display Emulation 198 Keyboard Mapping 101/102 Key Keyboard Layout (ATTN) RESET ( ) RECRD QUIT (F14) (F15) [MONO] (F13) F1 F2 (F16) F3 F4 PLAY (F18) (F19) (F20) (F17) F5 F6 F7 F8 [CRSEL] (F22) (F23) (F24) (F21) - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 215
Network Virtual Terminal Mode IBM 5250 Display Emulation Network Virtual Terminal (NVT) mode allows the operator to communicate with a network gateway (in ASCII) for routing, logon etc, before the full IBM terminal emulation protocol is established. NVT mode is indicated by the absence of the - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 216
an error has occured, as shown in the error line, pressing the Reset key will remove the error. Alternatively, more information can be obtained by Indicates whether the National (N) or Latin (L) character set is active when a code page that supports a bilingual keyboard is selected. Pressing the keys - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 217
Insert mode can be disabled by pressing the Insert key again, pressing the Reset key, or by performing any action that sends data to the host, such text cursor. Fax Image Support Fax images in Tiff, PCX and G3 format are supported. The following display facilities are supported if the host provides - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 218
IBM 5250 Display Emulation Word Processing Mode The following keyboard functions are available when the IBM 5250 emulation is in Word Processing mode: Symbols Command Begin Bold Centre Text Next Text Column Half-Index Down Required Tab End Attribute Find Stop Code Start New Page Required Page End - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 219
status line to indicate the current typing direction: Close Key Push Mode Selecting the Symbol Swap option on the Display tab of the 5250 Display Settings dialog will cause text symbols such as round or angle brackets to be displayed the correct way round when typing right-to-left. If text - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 220
within the Push segment while typing in the field's natural direction. Bilingual Keyboard Support When a code page that supports a bilingual keyboard is selected, you can toggle between the National and Latin character set by pressing the keys Shift + - on the keypad. The character N or L will be - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 221
of recorded keystrokes may be interrupted so that keystrokes can be entered manually before continuing with the recording or playback. Note that local Fn Quit is Alt + Left Control if Left Control is defined as the Reset key. The following procedure describes how to record keystrokes. 1 Press Record - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 222
by pressing the Delete key. 3 Enter the keystrokes to be recorded. You may pause recording at any time to allow keystrokes to be entered manually when played back by pressing Pause. Pause mode is indicated by the following symbols on the status line. To continue recording, press Pause again - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 223
Pause, then playback will halt at that point to allow you to enter keystrokes manually. Press Play to resume playback from where you stopped typing. If you want the Record or Play function. Remedy: Press the Reset key. 9007 You pressed an invalid sequence key (e.g. Play) while performing the Record - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 224
IBM 5250 Display Emulation 9019 In Record or Play mode. While the Record/play pause indicator was displayed on the status line you pressed an invalid key (e.g. Play key in Record mode, or Record key in Play mode). Remedy: Press the Reset key. 208 Record & Playback Keystrokes Facility - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 225
the following three methods: Session Wizard: In Step 1 set Emulation to IBM5250 Display then click the Configure button. TeemTalk Window: On the Session menu, select Emulation > IBM5250 Display then select Configure Emulation.... On the configuration bar, select IBM5250 Display in the Emulation - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 226
80 If double byte character sets (e.g. Japanese) are supported and you wish to use them, then select either 5555_B01 (monochrome) or 5555_C01 (colour). Enhanced UI Factory default: Unchecked Selecting this option will enable support of the IBM 5250 Extended User Interface for generating windows on - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 227
error messages to be displayed in a pop-up message box when line 24 is not visible on the display. Field Minus Justification Factory default: Unchecked The setting of this option determines whether pressing the Field Minus key affects the last digit (unchecked) or the space following the last digit - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 228
at the end of this section shows the default settings. National Codepage Settings Factory default: User Defined This specifies the type of national codepage to be used. Selecting User Defined will enable manual selection of the Codepage and Character Set using the following options. SBCS Codepage - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 229
IBM 5250 Display Emulation Default Language, Character Set & Codepage Settings Language English (US) English (UK) Belgian Canadian French Danish Finnish German Dutch Italian Swiss French Swiss German Swedish Norwegian French Spanish Portuguese Japanese Kanji + Katakana - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 230
IBM 5250 Display Emulation IBM EBCDIC Codepages Supplied Codepage 37 273 274 277 278 280 284 285 290 297 300 420 424 500 803 833 834 835 836 837 838 870 871 875 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 231
IBM 5250 Display Emulation Monochrome Factory default: Depends on the terminal type By default the setting of this option will match the normal display characteristic of the particular IBM 5250 model selected. In TeemTalk, all terminal types support both monochrome and colour display. When - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 232
characters on and off. Numeral Swap Factory default: Unchecked When using a code page that supports a bilingual keyboard, this will cause all numbers to be displayed using the National character set when in Latin mode. Symbol Swap Factory default: Unchecked Selecting this option will cause - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 233
Environment Variables IBM 5250 Display Emulation USER Specifies the user or account name to use to log on to the remote system. JOB Specifies the job ID to type of operating system used by the system sending this variable. DISPLAY Specifies the X display location of the client. Setup Options 217 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 234
local host name by entering %s after the device name. To return the user name, enter %u after the device name. You can specify how many and so on. These values are preserved over power off, so the first connection of any given power on may not be TEST1. Assume that the start problem 218 Setup Options - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 235
connecting to different hosts. IBMSUBSPW This enables you to specify the initial Password entry required on the standard startup screen so that it can be This specifies the type of keyboard being used. Advanced Settings Factory default: Unchecked Displays a Refresh button and Value for Do Not Report - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 236
IBM 5250 Display Emulation 220 Setup Options - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 237
HP TeemTalk Terminal Emulator 7.0 User Manual CHAPTER 16 IBM 5250 Printer Configure button to specify settings. 4 Select the Connection type then click the Configure button to specify settings. 5 Select IBM5250 Printer in the Emulation list box then click the Configure button to specify settings - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 238
the Session menu and select Connection... to set the connection method. 3 Display the Session menu and select Emulation.... Set the emulation to IBM5250 Printer. 4 You can configure the transport, connection and emulation settings by selecting the relevant Configure options in the Session menu. The - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 239
the following three methods: Session Wizard: In Step 1 set Emulation to IBM5250 Printer then click the Configure button. TeemTalk Window: On the Session menu, select Emulation > IBM5250 Printer then select Configure Emulation.... On the configuration bar, select IBM5250 Printer in the Emulation - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 240
Printer Emulation Model Settings Model Factory default: 3812-1 (Printer) This enables you to specify the printer model to emulate. There are two options: 3812-1 Single-byte printer. 5553-B01 Double-byte printer. Select the double-byte printer when using double-byte character sets such as Japanese - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 241
the end of this section shows the default settings. National Codepage Settings Factory default: User Defined This specifies the type of national codepage to be used. Selecting User Defined will enable manual selection of the Codepage and Character Set using the following options. Setup Options 225 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 242
default: 37 This is a numeric value specifying the single-byte character set codepage to use. SBCS Character Set Factory default: 697 This is a numeric value specifying the single-byte character set to use. DBCS Codepage Factory default: 0 This is a numeric value specifying the double-byte character - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 243
IBM 5250 Printer Emulation Default Language, Character Set & Codepage Settings Language English (US) English (UK) Belgian Canadian French Danish Finnish German Dutch Italian Swiss French Swiss German Swedish Norwegian French Spanish Portuguese Japanese Kanji + Katakana - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 244
IBM 5250 Printer Emulation IBM EBCDIC Codepages Supplied Codepage 37 273 274 277 278 280 284 285 290 297 300 420 424 500 803 833 834 835 836 837 838 870 871 875 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 245
Environment Variables IBM 5250 Printer Emulation The options on this tab specify Environment Variables and values passed as part of the Telnet 5250E protocol. Note the following: • A value of "," deletes the variable. • A value of CURRENTVALUE,NAME=VALUE adds a new variable NAME with value VALUE. - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 246
IBM 5250 Printer Emulation USER Specifies the user or account name to use to log on to the remote variable. DISPLAY Specifies the X display location of the client. DEVNAME Specifies the name of the printer device. IBMIGCFEAT This is always set to Don't Report. IBMMSGQNAME Specifies the name of the - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 247
will use the host print transform function to generate ASCII printer data. This is always set to Yes. The IBMMFRTYPMDL option must specify the printer manufacturer, type and model. IBMMFRTYPMDL Factory default: *None Specifies the printer manufacturer, type and model. The entry must exactly match - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 248
EPLQ860 *EPSQ870 *NECP2200 *NECP6300 *OKI391IBM *OKI800 *PAN1124EP *PAN1624EP *PAN2180EP *PAN4450IHP IBMPPRSRC1 IBMPPRSRC2 Factory default: [! Don't Report] These options specify the paper format to be used. The possible settings are: Don't Report No value returned. *NONE No paper source is defined - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 249
mm). B4-sized paper (257 mm x 364 mm). Ledger-sized paper (11 inches x 17 inches). IBMENVELOPE Factory default: [! Don't Report] This specifies the envelope format to be used. The possible settings are: Don't Report No value returned. *NONE No envelope source is defined. *MFR The system determines - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 250
of the object containing pointers to the work station customizing tables. Advanced Settings Factory default: Unchecked Displays a Refresh button and Value for Do Not Report option when checked. Value for Do Not Report Factory default: [! This specifies the character string used to indicate that the - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 251
HP TeemTalk Terminal Emulator 7.0 User Manual CHAPTER 17 TA6530 Emulation This chapter Configure button to specify settings. 4 Select the Connection type then click the Configure button to specify settings. 5 Select TA6530 in the Emulation list box then click the Configure button to specify settings - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 252
the Session menu and select Connection... to set the connection method. 3 Display the Session menu and select Emulation.... Set the emulation to TA6530. 4 You can configure the transport, connection and emulation settings by selecting the relevant Configure options in the Session menu. The options - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 253
interact with you on a character, word or line-by-line basis. Display memory is treated as one long page consisting of 400 lines, of which 24 lines scrolled into view using cursor or display control keys. Once all the display memory has been used, new data will force all previous lines of data up - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 254
usually found on a TA6530 keyboard can be mapped to any key on your keyboard using the TA virtual key names listed in the Key Macro Settings dialog. The illustrations on the following pages show where TA6530 keyboard functions are mapped to keys on a 101/102 key keyboard. 238 The Rule Cursor - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 255
F5 F6 F9 F10 F11 F12 PRINT SCRN (PAGE) ERASE LINE RESET BREAK with Control INSERT CHAR HOME RULE C ON PG UP DELETE (PGDN) 1 2 3 ENTER (CHAR INSERT) (C DEL) 0 . Alt key usage: RESET Normal key usage: BREAK All unmarked keys function as indicated by the legends on the keycaps. - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 256
or disable display of a border that separates this line from the lines above it. This is achieved using the Status border option in the TA6530 Settings dialog. The status line is divided into two fields. The first and leftmost field is used to display messages of up to 64 characters in - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 257
the status line will be temporarily replaced by an error line which will display one of the following messages: INVALID LANGUAGE SET REQUESTED You tried to use an invalid national character set. INVALID DATA You tried to enter an invalid character in the current field when in Block protect mode. The - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 258
bar, select TA6530 in the Emulation list box then click Configure Emulation. The setup options are grouped on three tabs labelled General, Display and Preferences. Power-up mode Factory default: Conversational This option determines the operating mode that is in effect when the TA6530 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 259
used for displaying characters. Multinational mode Factory default: Unchecked This option will only be available if the system is configured for a language that supports national replacement character sets. It determines the type of character set used to generate characters. When unchecked, TeemTalk - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 260
you to specify how the text cursor is displayed. Select from Block, Underline, Static block, Static underline or None. Auto wrap Factory default: Unchecked The setting of this option determines whether characters wrap to the next line when the right margin is reached. When unchecked, on reaching the - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 261
text cursor moves across the display. Copy right to left Factory default: Unchecked This enables the copy commands to function in right to left display mode. Status border Factory default: Checked This option enables you to display a thin border which separates the status line from the rest of the - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 262
blocking for X.25 communications line support, and if so, the size of the packet block. The size may be set to any of the listed 128-byte increments, or, by setting this option to Off, the default size of 260 bytes. Telserv format Factory default: Unchecked The setting of this option determines how - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 263
TA6530 Emulation Scroll rate Factory default: 32 This determines the number of lines that are scrolled when the Jump scroll option above is selected. Setup Options 247 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 264
TA6530 Emulation 248 Setup Options - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 265
Emulator 7.0 User Manual CHAPTER 18 Wyse Emulations Introduction This chapter describes features of the Wyse terminal emulations. The Wyse suite of terminal emulations consists of the following emulations which can be selected using the Emulation mode option in the Wyse Settings dialog: ADDS - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 266
software designed for the PC Term personality supported Programs > HP > HP TeemTalk Terminal Emulator configuration for future selection. 3 Select the Transport method then click the Configure button to specify settings. 4 Select the Connection type then click the Configure button to specify settings - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 267
the Session menu and select Connection... to set the connection method. 3 Display the Session menu and select Emulation.... Set the emulation to Wyse. 4 You can configure the transport, connection and emulation settings by selecting the relevant Configure options in the Session menu. The Emulation - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 268
to the terminal being emulated. The mapping of key functions can be determined by referring to the Emulation Keys list box in the Key Macro Settings dialog, which is displayed by selecting Key Macros... on the Tools menu. The information in brackets in the right column indicates the default mapping - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 269
Wyse Emulations 101/102 Key Keyboard Layout Keyboard Mapping 253 ESC F11 F12 F13 F14 F1 F2 F3 F4 F15 F16 F7 F8 F5 F6 F1 - F6 function as F13 - F16 when shifted. (BACKTAB) TAB F9 F10 F11 F12 (SEND) HOLD BREAK PRINT FUNCT INS CH with Alt INS LIN with Ctrl DELETE BACKSPACE (REPL) HOME PREV - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 270
right section is used to display messages from the host. The type of status line displayed is determined by the setting of the Status line option in the Wyse settings dialog. The Extended status line provides similar information to the Standard status line but with additional fields for displaying - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 271
LCL indicates local mode. BLK indicates block mode. HBLK indicates half-duplex block mode. HLD indicates that display update has been suspended. Pressing the Hold key will toggle display update on and off. Field 5: >AUX indicates that the emulation is in auxiliary print or transparent print mode - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 272
using one of the following three methods: Session Wizard: In Step 1 set Emulation to Wyse then click the Configure button. TeemTalk Window: On the Session menu, select Emulation > Wyse then select Configure Emulation.... On the configuration bar, select Wyse in the Emulation list box then click - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 273
General Settings Wyse Emulations Emulation mode Factory default: WY50+ This specifies the particular terminal to emulate, as supported by Wyse WY-50/50+/60 terminals. Select from the following: ADDS A2 Provides compatibility with software designed to drive the ADDS Viewpoint A2 terminal, as - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 274
Provides compatibility with software designed for the PC Term personality supported by Wyse. Font Factory default: Courier set Factory default: Ascii This specifies the character set used for displaying characters. Ansi codepage Factory default: PC Multinational (437) This option determines the set - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 275
. Page size Factory default: 1 x Lines This option applies to the WY-50+ and WY-60 emulations and specifies the size of a page in display memory in multiples of the Lines setting. Note that the other emulations only support 1 x Lines. The 1 + Rest setting will divide the display memory into two - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 276
memory to be cleared, the cursor will move to the home position and the scroll margin will be reset. Attribute type Factory default: Page The setting WY-50, ADDS A2 and HZ 1500 emulations only support the Page setting. Status line Factory default: Standard This option applies to all emulations and - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 277
remains on the last line. When unchecked, the cursor moves to the top of the same page. Auto page Factory default: Unchecked This option applies to the WY-50+, WY-60 and all the TVI emulations. It determines same page or data scrolls up from the bottom, as determined by the setting Setup Options 261 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 278
Wyse Emulations of the Auto Scroll option. When checked, a new page of memory will be displayed. Note: The other emulations will always display a new page of memory. Auto wrap Factory default: Checked The setting of this option determines whether characters wrap to the next line when the right - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 279
Checking this option will cause the characters to be underlined. Note that the WY-50+ and WY-60 emulations also support the underline attribute. WPRT blink Factory default: Unchecked This option applies to all emulations and enables you to specify the appearance of write-protected characters on the - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 280
destructive backspace, causing the character to the left of the cursor to be deleted and the cursor to move into that position. Margin bell Factory default: Unchecked This option applies to all emulations and it determines whether or not an audible warning sounds when the cursor reaches a specified - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 281
default: Checked When this option is checked, TeemTalk will recognize an additional set of Wyse codes which are not normally supported by specific non-Wyse terminals. Answerback Factory default: Unspecified This enables you to specify the Answerback string that is sent to the host in response - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 282
Wyse Emulations Colour support Factory default: Unchecked When this option is checked, an additional set of host commands will be recognized to determine the colours used for the display. Wyse 350 colour commands will be recognized in all modes except - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 283
at a time when the window becomes full. When checked, data will scroll up several lines at a time as determined by the Scroll rate setting below. Scroll rate Factory default: 24 This determines the number of lines that are scrolled when the Jump Scroll option above is selected. Setup Options 267 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 284
regular intervals other than every 8th column, enter the number of columns required between each tab stop in the box next to the Set Every button, then click the button. Individual tab stops can be toggled on or off by clicking the mouse pointer above or below the relevant - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 285
Emulator 7.0 User Manual CHAPTER 19 Running Scripts This chapter describes how to run a script program. Introduction TeemTalk provides a scripting language that enables you to automate a variety of operations. The commands that can be used in a script file are described in the HP TeemTalk Terminal - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 286
Running Scripts 3 Either enter the name of the script file in the Script File box, or click the Browse button to select the file. 4 If you want to edit the script you can do so by clicking the Edit button. This will display the Script Editor window which provides editing facilities so that you can - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 287
Introduction HP TeemTalk Terminal Emulator 7.0 User Manual CHAPTER 20 Capturing Host Communication This chapter describes how to capture the communication between the host and the emulator in a file, then replay it. TeemTalk - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 288
Capturing Host Communication Capture File To start the Capture File process: 1 Select Capture File on the Tools menu to display the Save capture file as dialog. 2 Enter a name for the capture file in the File name box then click the Save button. Communication between the host and the emulation will - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 289
Replay File Capturing Host Communication To start the Replay File process: 1 Select Replay File on the Tools menu to display the Choose a file to replay dialog. 2 Enter the name of the capture file to replay in the File name box then click the Open button. Communication between the host and the - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 290
Capturing Host Communication 274 Replay File - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 291
HP TeemTalk Terminal Emulator 7.0 User Manual CHAPTER 21 Command Line Options This chapter describes the command line options that can be used to specify the TeemTalk startup configuration. The command line for running TeemTalk can include options that modify its startup configuration - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 292
mysessionfile.tts" This enables you to load settings stored in a session configuration file previously created using either the TeemTalk message box will be displayed asking if you want to save the new settings before exiting. Using this command line option without the optional value will - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 293
enables received host data to be logged in a file for replaying later using the Capture File and Replay File options on the Tools menu. Session Configuration 277 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 294
sent back to the host to be logged in a file for replaying later using the Capture File and Replay File options on the Tools menu. Set Bitwise Debugging Flags Command Line: -debug=NN This - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 295
that this also removes the window frame, soft buttons, menu and configuration bars. Show Window Minimized Command Line: +wmn This will cause the +wmx This will cause the TeemTalk window to be maximized on startup. Set Window Position Command Line: +posleft,down This specifies the position of the - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 296
Command Line Options Disable Window Resize Command Line: -wrd This prevents the TeemTalk window from being resized. Remove the Window Frame Command Line: -wfr This will remove the window frame from the display. Note that this also removes the title bar, system menu, minimize and maximize buttons - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 297
Add the System Menu Command Line Options Command Line: +sys This will add the system menu to the display. Note that the title bar must be enabled. Remove/Disable Minimize Button Command Line: -mnb This will remove or disable the minimize button. Note that the window frame will also be removed. - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 298
the menus using the following command line options: File Menu -ffd -frt -fnw -fnt -fct -fos -fss -fsa -fps -fpr -fex Remove Factory Default. Remove Reset Terminal. Remove New Window. Remove New Tab. Remove Close Tab. Remove Open Session. Remove Save Session. Remove Save Session As. Remove Print - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 299
Disconnect. Session Menu -str -sco -sem -sct -scc -sce Remove Transport. Remove Connection. Remove Emulation. Remove Configure Transport. Remove Configure Connection. Remove Configure Emulation. Tools Menu -tat -tkm -tma -tsb -tal -tcf -trf -tep Remove Attributes. Remove Key Macros. Remove - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 300
Options Help Menu -hth Remove HP TeemTalk Help. -hab Remove About. Remove the Configuration Bar Command Line: -cfg This will remove the configuration bar from the display. Note that the Session menu will also be removed from the menu bar. Remove Configuration Bar Items You can remove individual - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 301
10 All directions resize. 11 Vertical splitting. 12 Horizontal splitting. 13 Pointing hand. 14 Slashed circle. 15 Arrow with question mark. 16 Arrow with hourglass/watch. Reflection 4 Colour Support Command Line: +r4c This enables Reflection 4 colour commands to be processed in the VT terminal - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 302
Command Line Options 286 Emulation Workspace - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 303
Introduction HP TeemTalk Terminal Emulator 7.0 User Manual APPENDIX A Programming Keys & Buttons This appendix settings in the following dialogs displayed from the Tools menu: Key Macro Settings described in the section "Defining Key Functions" on page 38. Mouse Action Settings described - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 304
are identified by virtual key names as listed in the Key Macro Settings dialog in the Emulation Keys and Virtual Keys list boxes. The virtual key a DEC VT terminal emulation is VT_RETURN. You would enter this in the user definition box as follows: Key Combinations To program a key or button - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 305
F2 then F3 then F4, enter the following characters in the user definition box: Including Special Characters Control Characters There are various ways in which you can specify a particular character in a user definition. For example, the ESC character can be specified using any - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 306
Programming Keys & Buttons Running a Script File You can define a macro to run a script file by enclosing the name of the file and any arguments within the (single quote and right angle bracket) characters. For example, to run the script file myscript. - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 307
HP TeemTalk Terminal Emulator 7.0 User Manual APPENDIX B Virtual Key Names Introduction This appendix lists all the virtual key names for including specific key functions in a macro definition. This appendix lists the virtual key names supported Key Macro Settings and Soft Button Settings dialogs - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 308
Virtual Key Names Standard Virtual Key Names The virtual key names listed in this section are applicable in all terminal emulations. Key Function 0 - 9 A - Z Alt (right) Apps Apostrophe Attention Backspace Blank Key Break Capital Clear Clear (OEM) Comma Compose Character Control (left) Control ( - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 309
Virtual Key Names Exit Emulator VK_EXIT Exsel VK_EXSEL F1 - F24 VK_F1 - VK_F24 Help VK_HELP Hold Screen VK_HOLDSCREEN Home VK_HOME Hyphen VK_HYPHEN Insert VK_INSERT Menu VK_MENU Num Lock VK_NUMLOCK Numeric Pad 0 - 9 VK_NUMPAD0 - VK_NUMPAD9 Numeric Pad Add (+) VK_ADD Numeric - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 310
Virtual Key Names Mouse Buttons Spacebar Square Bracket (left) Square Bracket (right) Tab Windows (left) Windows (right) Zoom VK_SPACE VK_LBRACKET VK_RBRACKET VK_TAB VK_LWIN VK_RWIN VK_ZOOM Mouse Action Left Click Right Click Middle Click Left Double-Click Right Double-Click Middle Double-Click - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 311
AT&T 4410 Virtual Key Names Virtual Key Names The following virtual key names can be used when running the AT&T 4410 terminal emulation in addition to all the VK_ virtual key names listed in the section "Standard Virtual Key Names" on page 292. Key Function Backspace Break Clear Cursor Up Cursor - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 312
Virtual Key Names DEC VT510 Virtual Key Names The following virtual key names can be used when running any of the DEC VT terminal emulations in addition to all the VK_ virtual key names listed in the section "Standard Virtual Key Names" on page 292. Key Function Back Tab Break Backspace Compose - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 313
Virtual Key Names Print Scrolling Region Remove Return Scroll Down Scroll Left Scroll Right Scroll Up Select Setup Tab VT_PRINTSCROLL VT_REMOVE VT_RETURN VT_PANDOWN VT_PANLEFT VT_PANRIGHT VT_PANUP VT_SELECT VT_SETUP VT_TAB DEC VT510 Virtual Key Names 297 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 314
Virtual Key Names The following virtual key names can be used when running the HP terminal emulation in addition to all the VK_ virtual key names listed in the HP_INSERTWRAP HP_MENU HP_NEXTPAGE HP_PREVPAGE HP_PRINT HP_RETURN HP_ROLLDOWN HP_ROLLUP HP_SELECT 298 HP 700-92/96 Virtual Key Names - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 315
Tab Tab Shifted User System Mode Selection Keys User Keys Mode User Key Def. Menu Soft Reset Hard Reset HP_TAB HP_BACKTAB HP_SYSTEM HP_MODES HP_USER HP_FKEYDEFS HP_SOFTRESET HP_HARDRESET Virtual Key Names HP 700-92/96 Virtual Key Names 299 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 316
Virtual Key Names IBM 3151 Virtual Key Names The following virtual key names can be used when running the IBM 3151 terminal emulation in addition to all the VK_ virtual key names listed in the section "Standard Virtual Key Names" on page 292. Key Function Alrm Up Alrm Down Backspace Back Tab Break - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 317
Jump Line Feed Local Numeric Pad 0 - 9 PA1 - PA3 Print Message Print Line Print Screen Print View Reset Return Send Send Line Send Message Setup Sub Sup Tab Trace TXF1 - TXF12 Virtual Key Names I51_JUMP I51_LINEFEED I51_LOCAL I51_NUMPAD0 - I51_NUMPAD9 I51_PA1 - I51_PA3 I51_PRTMSG I51_PRTLINE - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 318
Virtual Key Names IBM 3270 Virtual Key Names The following virtual key names can be used when running the IBM 3270 terminal emulation in addition to all the VK_ virtual key names listed in the section "Standard Virtual Key Names" on page 292. Key Function Alternate Code Page Attention Back Tab - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 319
Setup Notice Board Zoom Num Lock PA1 - PA3 Pause Play Keystrokes Previous Word Print Screen Push Mode On/Off Quit Record Keystrokes Reset Return Reverse Input Direction Reverse Screen Rule Display Selectable Field Tab System Request Tab Test Key To Host IB_LCLMAP IB_MONO IB_NEWLINE IB_NEXTWORD - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 320
Virtual Key Names IBM 5250 Virtual Key Names The following virtual key names can be used when running the IBM 5250 terminal emulation in addition to all the VK_ virtual key names listed in the section "Standard Virtual Key Names" on page 292. Key Function Virtual Key Name Alternate Code Page - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 321
AS_PAUSE Play Keystrokes AS_PLAY Print Local AS_PRINTLOCAL Print AS_PRINT Push Mode On/Off AS_PUSH Quit AS_QUIT Record Keystrokes AS_RECORD Reset AS_RESET Reverse Close Text AS_REV_CL Reverse/Normal Toggle AS_REV_IP Reverse Whole Screen AS_REV_SC Roll Down AS_ROLLDOWN Roll Up - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 322
Virtual Key Names IBM 5250 Word Processing Mode Key Function Begin Bold Begin Underline Word Underline End Attribute Centre Text Half-Index Up Half-Index Down Next Text Column Beginning of Line End of Line Top of Page End of Page Start New Page Insert Carrier Return Insert Stop Code Find Stop Code - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 323
TA6530 Virtual Key Names Virtual Key Names The following virtual key names can be used when running the TA6530 terminal emulation in addition to all the VK_ virtual key names listed in the section "Standard Virtual Key Names" on page 292. Key Function Backspace Back Tab Break Break Shifted - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 324
Roll Up Roll Up Shifted Roll Down Roll Down Shifted Tab Tab Clear Tab Clear All Tab Set TA_C_ENTER TA_PADMINUS TA_PAGEDOWN TA_S_PAGEDOWN TA_PAGEUP TA_S_PAGEUP TA_PRTSCR TA_S_PRTSCR TA_RETURN TA_S_RETURN TA_C_RETURN TA_ROLLUP TA_S_ROLLUP TA_ROLLDOWN TA_S_ROLLDOWN TA_TAB TA_TABCLEAR TA_TABCLRALL - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 325
Wyse Virtual Key Names Virtual Key Names The following virtual key names can be used when running the Wyse terminal emulations in addition to all the VK_ virtual key names listed in the section "Standard Virtual Key Names" on page 292. The shifted function of the following keys can be specified - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 326
Virtual Key Names Keypad 5 Num Lock Page Up Page Down Pause Print Print shifted Return Split Tab WY_KP5 WY_NUMLOCK WY_PAGEUP WY_PAGEDOWN WY_PAUSE WY_PRINT WY_SEND WY_RETURN WY_SPLIT WY_TAB 310 Wyse Virtual Key Names - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 327
HP TeemTalk Terminal Emulator 7.0 User Manual APPENDIX C Product Specification Introduction General Limitations This appendix describes the level of support provided by each terminal emulation. The following sections describe the level of support provided by each terminal emulation throughout the - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 328
Product Specification • Smooth Scroll and Variable Scroll rates not supported. • No graphics or APA graphics. Telnet Specification • Implements RFC No Select font in graphic rendition. • No Virtual terminal commands. • No Set curses fix. • No Page scroll. • No Alternate screen buffer. • No Xwindows - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 329
Manual (EK-VT420-RM-001). • The DEC Multisession and SSU protocols are not implemented. HP 700/92 Emulation Specification • HP 2392A Reference Guide -1 Non Host Print Transform (Non-HPT) print protocol is not supported. • No Calculator / Hex key. • No Password encryption. Digital VT Emulation 313 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 330
Operator's Manual (TVI 131974-00 June 1985). • Page print flip mode not supported. • Serial configuration commands not supported. • Select character set commands not supported. Tandem 6526/6530 Emulation Specification Limitations • Tandem 653x Multi-Page Terminal Programmer's Guide (82310 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 331
Televideo 955 Display Terminal Operator's Manual (131969-00B Sept 1985). • Page print flip mode not supported. • Serial configuration commands not supported. • Select character set commands not supported. Wyse 60 Native Emulation Specification Limitations • WY-60 Programmer's Guide (880261-01 Rev - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 332
/ES Reference Manual (883227-01 Rev. A). All modes: • As Wyse 60 above where applicable. TVI modes: • Select Print / Line termination characters. Wyse PC-Term: • Default unit command not supported. • Program key with direction not supported. • Set print terminators not supported. • Define delimiters - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 333
Index HP TeemTalk Terminal Emulator 7.0 User Manual Numerics 3270 Display Settings dialog 171 Display tab 178 Keyboard tab 180 Model tab 171 National tab 174 Notice Board tab 181 3270 Printer Settings dialog 186 Model tab 186 National tab 189 Print By Pass tab 193 5250 Display Settings dialog 209 - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 334
68 Advanced tab file 77 LPR 75 serial device 72 system printer 71 Settings tab 69 Status tab 68 emulation selection 318 configuration bar 15 Session Wizard 9 emulation workspace 14 emulations AIXTerm 79 Ansi BBS 79 AT 386 79 ATT4410 79 HP 700-92/96 105 IBM 3151 137 IBM 3270 Display 155 IBM - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 335
125 specification 313 user key definition screen 121 user keys mode 121 virtual key names 298 HP Settings dialog 125 Configuration tab 128 General tab 3270 Printer emulation 183 codepages supplied 192 create session Session Wizard 183 TeemTalk window 184 printer support 185 setup options 186 IBM - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 336
fax image support 201 NVT names 304 IBM 5250 Printer emulation 221 codepages supplied 228 create session Session Wizard 221 TeemTalk window Settings dialog 38 keyboard compose character sequences 41 defining key functions 38 mapping 37 programming keys 287 keyboard mapping AT&T 4410 emulation 88 HP - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 337
using Open Session menu item 12 session configuration connection type 18 transport method 18 specification 311 AIXTerm 312 Digital VT 313 general 311 HP 700-92/96 313 IBM 3151 314 IBM 3270 Profile Settings dialog 23, 26 SSH2 Settings dialog 22 SSH2 transport 22 creating a profile password 23 public - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 338
tab 244 General tab 242 Preferences tab 246 TCP/IP Settings dialog 21 TCP/IP transport 21 technical support 5 TeemTalk window elements 13 telnet 18 telnet settings host connection telnet settings 19 Telnet Settings dialog 19 terms used in manual 4 title bar 13 Tools menu Attributes 58 322 Capture - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 339
87 VT Series Settings dialog 90 Display tab 97 General tab 91 Preferences tab 101 VT+HP220 emulation 80 VT100 emulation 80 VT100+ emulation 80 VT510 7-Bit emulation 80 VT510 8-Bit emulation 80 VT52 emulation 80 VT-UTF8 emulation 80 W window new 14 window elements 13 configuration bar 15 emulation - HP Neoware e140 | HP TeemTalk Terminal Emulator 7.0 User Manual - Page 340
Index 324
HP TeemTalk Terminal Emulator 7.0
User Manual