HP NetServer LT 6000r HP Netserver LXr 8500 NetRAID-4M Config Guide for Windo - Page 2

Power source System software: Navigator version Operating System Service Pack SPU Model Clock speed No. of CPUs BIOS version CPU cache RAM No. of power supplies Local storage I/O slots Default Boot Order Microsoft® and HP Certified Configuration Storage Direct from power mains, power conditioner or uninterruptible power supply (UPS) using any power conditioner or UPS. Redundant power distribution units (PDU's) are strongly recommended. L.20.00 or later Microsoft Windows® 2000 Advanced Server SP1 HP NetServer LXr 8500 700 MHz 2 - 8 ASPN Release 8 Any size 256 MB minimum. Must be HP. 3 See Local Storage below. Added cards may be installed in any appropriate slot, keeping in mind the server's default boot order as listed below: IDE CD-ROM, FDD, PCI-1, PCI-2, SCSI A, SCSI B, PCI-3, PCI-4, PCI-5 through PCI-10 P3 - Intra-cluster (Heartbeat) LAN - D5013B P4 - Client LAN - D5013B P5 - Local storage -NetRAID-1Si P7 - Shared storage - NetRAID-4M Booted from NetRAID-1Si Local Controller Driver Physical drive location Disk drives SCSI bus SCSI Ids Shared Controller Model No. of controllers BIOS Firmware May use embedded SCSI, NetRAID-1Si, NetRAID-3Si, NetRAID-1M or NetRAID-2M. For embedded SCSI, use sym_hi.sys 4.12 or later. For NetRAID-xSi, use mraid35x.sys version 2.66. For NetRAID-1M/2M, use mraid2k.sys, version 5.20 or later. All are from Navigator L.20.00 or later. SPU internal drive bays or HP external drive cabinet (e.g., HP Rack Storage/12) Must be HP Any HP cables that meet SCSI specifications and any SCSI bus speed Any HP NetRAID-4M Adapter D9161A or D9351A 2 Disabled 4584 2