HP Nw8000 Software Guide - Page 42
Entering DriveLock Passwords, Setup from a Windows restart, DriveLock settings are
UPC - 829160468389
View all HP Nw8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Security 10. To confirm DriveLock protection on the drive you have selected, type DriveLock in the confirmation field, then press f10. 11. To save your DriveLock settings, select File > Save Changes and Exit, then follow the instructions on the screen. Your preferences are set when you exit Computer Setup and take effect when the notebook restarts. Entering DriveLock Passwords 1. Be sure that the drive is inserted into the notebook (not an optional Port Replicator or external MultiBay). 2. When prompted for a DriveLock password, type your user or master password (using the same type of keys you used to set the password), then press enter. 3. After 2 attempts to enter the password incorrectly, you must restart the notebook and try again. Changing DriveLock Passwords Ä CAUTION: To prevent loss of work and damage to the notebook and the hard drive, shut down the notebook before inserting or removing a primary hard drive. (The primary hard drive is any hard drive used in the hard drive bay.) To access the DriveLock settings in Computer Setup, you must shut down, then turn on the notebook. If you open Computer Setup from a Windows restart, DriveLock settings are not accessible. 1. Verify that the notebook is off and not in Hibernation by pressing the power button. If your work returns to the screen, shut down the notebook. 2. Be sure that the hard drive is inserted into the notebook (not an optional Port Replicator or external MultiBay). 3-12 Software Guide