HP Nw8000 HP Compaq nc8000 Business PC, HP Compaq nw8000 Mobile Workstation - - Page 118
and slide it to the, Lift up on the left side of the shield
UPC - 829160468389
View all HP Nw8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Removal and Replacement Procedures ✎ Some computer models have two Torx7 with pin security screws (M2.0×4.0) securing the Mini PCI communications board to the computer. A T7 pin bit screw driver is required to remove the Mini PCI communications board on these computer models. 3. Remove the two T8M2.0×4.0 screws 1 that secure the Mini PCI communications board shield to the notebook. 4. Lift up on the left side of the shield 2 and slide it to the left 3 to remove it. ✎ The Mini PCI communications board shield is included in the Miscellaneous Plastics Kit, spare part number 345066-001. Removing the Mini PCI Communications Board Shield Maintenance and Service Guide 5-25
Removal and Replacement Procedures
Maintenance and Service Guide
5–25
✎
Some computer models have two Torx7 with pin security screws
(M2.0×4.0) securing the Mini PCI communications board to the
computer. A T7 pin bit screw driver is required to remove the
Mini PCI communications board on these computer models.
3. Remove the two T8M2.0×4.0 screws
1
that secure the Mini
PCI communications board shield to the notebook.
4. Lift up on the left side of the shield
2
and slide it to the
left
3
to remove it.
✎
The Mini PCI communications board shield is included in the
Miscellaneous Plastics Kit, spare part number 345066-001.
Removing the Mini PCI Communications Board Shield