HP Nw9440 Multimedia - Page 6
Removing an optical disc (without power)
UPC - 882780782174
View all HP Nw9440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Multimedia hardware Removing an optical disc (without power) If external or battery power is not available: 1. Insert the end of a paper clip 1 into the release access in the front bezel of the drive. 2. Press gently until the tray is released, and then pull out the tray 2. 3. Remove the disc 3 from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disk by the edges and avoid touching the flat surfaces. ✎ If the tray is not fully accessible, tilt the disc carefully as you remove it. 4. Close the media tray and place the disc in a protective case. 1-4 Multimedia
1–4
Multimedia
Multimedia hardware
Removing an optical disc (without power)
If external or battery power is not available:
1. Insert the end of a paper clip
1
into the release access in
the front bezel of the drive.
2. Press gently until the tray is released, and then pull out the
tray
2
.
3. Remove the disc
3
from the tray by gently pressing down on
the spindle while lifting the outer edges of the disc. Hold the
disk by the edges and avoid touching the flat surfaces.
✎
If the tray is not fully accessible, tilt the disc carefully as you
remove it.
4. Close the media tray and place the disc in a protective case.