HP Nx7400 Drives - Windows Vista - Page 15
Removing an optical disc (without power)
UPC - 882780786653
View all HP Nx7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Optical drives (select models only) Removing an optical disc (without power) If external or battery power is not available: 1. Insert the end of a paper clip 1 into the release access in the front bezel of the drive. 2. Press gently until the media tray is released, and then pull out the tray 2. Remove the disc 3 from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces. ✎ If the media tray is not fully accessible, tilt the disc as you remove it. 3. Close the media tray and place the disc in a protective case. Drives 4-5
Optical drives (select models only)
Drives
4–5
Removing an optical disc (without power)
If external or battery power is not available:
1. Insert the end of a paper clip
1
into the release access in the
front bezel of the drive.
2.
Press gently until the media tray is released, and then pull out
the tray
2
. Remove the disc
3
from the tray by gently
pressing down on the spindle while lifting the outer edges of
the disc. Hold the disc by the edges and avoid touching the
flat surfaces.
✎
If the media tray is not fully accessible, tilt the disc as you
remove it.
3. Close the media tray and place the disc in a protective case.