HP Nx7400 Memory Modules - Windows Vista - Page 13
Press the memory module, into the memory slot until it is seated.
UPC - 882780786653
View all HP Nx7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Adding or replacing memory modules 13. To insert a memory module: a. Align the notched edge 1 of the memory module with the tab in the memory module slot. Ä To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module 2 into the memory slot until it is seated. c. Press the memory module 3 down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. Memory Modules 11
Adding or replacing memory modules
Memory Modules
11
13. To insert a memory module:
a.
Align the notched edge
1
of the memory module with
the tab in the memory module slot.
Ä
To prevent damage to the memory module, hold the
memory module by the edges only. Do not touch the
components on the memory module.
b.
With the memory module at a 45-degree angle from the
surface of the memory module compartment, press the
module
2
into the memory slot until it is seated.
c.
Press the memory module
3
down, applying pressure to
both the left and right edges of the memory module, until
the retention clips snap into place.