HP OmniBook 500 HP OmniBook 500 - Reference Guide Revision 3 - Page 63
Modem and Network Connections, Reference Guide
View all HP OmniBook 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Modem and Network Connections Using the Modem 2. Connect the telephone cord to the built-in modem. CAUTION 3. Plug the other end of the phone cord into a telephone jack. If the plug on the phone cord doesn't fit the jack, you may need to use an adapter. 4. Check your modem's country or region settings: • Windows 98: click Start, Settings, Control Panel, double-click Modems, then click Dialing Properties. • Windows 2000: click Start, Settings, Control Panel, double-click Phone and Modem Options, then click Edit on the Dialing Rules tab. • Windows XP: click Start, Control Panel, Printers and Other Hardware, Phone and Modem Options. Your built-in modem may not work with multiple phone lines or a private branch exchange (PBX), cannot be connected to a coin-operated telephone, and does not work with party lines. Some of these connections may result in excess electrical voltage and could cause a malfunction in the internal modem. Check your telephone line type prior to connecting your phone line. Special restrictions in certain countries • The pulse dialing feature may be disabled in certain countries, possibly because Loop Disconnect is not certified there. If pulse dialing is disabled, you should use tone dialing connections only. • Many countries impose a blackout period after a modem repeatedly fails to connect to a service provider. The number of failed attempts and the period you must wait before trying again differ from country to country: check with your telephone company. Reference Guide 63