HP P Class 450/500/550/600/650/700/750 ATI Fire GL 4 graphics card (read befo
HP P Class 450/500/550/600/650/700/750 Manual
View all HP P Class 450/500/550/600/650/700/750 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP P Class 450/500/550/600/650/700/750 manual content summary:
- HP P Class 450/500/550/600/650/700/750 | ATI Fire GL 4 graphics card (read befo - Page 1
Hewlett-Packard Company 3404 East Harmony Road Fort Collins, Colorado 80528 Read Before Installing Fire GL4 Graphics Card HP Product No. A7226A General HP Installation Instructions NOTE Before you install your graphics card, refer to the your workstation's Owner's Guide for important system confi - HP P Class 450/500/550/600/650/700/750 | ATI Fire GL 4 graphics card (read befo - Page 2
GL CD. To obtain future driver upgrades and the Card Installation Instructions as supplied by HP, go to: http://www.hp.com/workstations/support a. If you are installing on a system that previously had a different graphics card, you must uninstall that device's driver. Use the Windows® Control Panel - HP P Class 450/500/550/600/650/700/750 | ATI Fire GL 4 graphics card (read befo - Page 3
was tested in a typical Hewlett-Packard workstation configuration. Original signed by Ruth Lutes, Site Quality Manager, Fort Collins, CO, USA For Compliance Information ONLY, contact: European Contact: Your local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Dept. HQTRE Standards
Hewlett-Packard Company
3404 East Harmony Road
Fort Collins, Colorado 80528
Read Before Installing
Fire GL4 Graphics Card
HP Product No. A7226A
General HP Installation Instructions
NOTE
Before you install your graphics card,
refer to the your workstation’s
Owner's
Guide
for important system configuration information.
CAUTION
Graphics cards are susceptible to electrostatic shock. When handling your card,
always wear a properly grounded wrist strap and handle the card carefully.
1.
Before
opening
your
w
orkstation to install the graphics card, disconnect all power, peripheral, and telecommuni-
cations cables from the system. When referring to your system model/type and for obtaining the proper driver
version, please use the AxxxxX nomenclature found on the Serial Number plate on the back of the machine.
2.
Following the procedures described in your workstation’s
Owner's Guide
, install the graphics board
into the
appropriate AGP Pro slot (see the system board slot diagram below). Slide the board into the slot, making sure
the board is fully seated in the connector.
3.
Connect the provided DVI-I to VGA converter from either card connector, then to your standard monitor cable.
When connecting to a DVI digital flat panel monitor no converter is necessary.
Example system board
AGP Pro Slot
Install Fire GL4 card in
A7226- 90000