HP P Class 450/500/550/600/650/700/750 ATI Fire GL 4 graphics card (read befo - Page 1
HP P Class 450/500/550/600/650/700/750 Manual
View all HP P Class 450/500/550/600/650/700/750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Hewlett-Packard Company 3404 East Harmony Road Fort Collins, Colorado 80528 Read Before Installing Fire GL4 Graphics Card HP Product No. A7226A General HP Installation Instructions NOTE Before you install your graphics card, refer to the your workstation's Owner's Guide for important system configuration information. CAUTION Graphics cards are susceptible to electrostatic shock. When handling your card, always wear a properly grounded wrist strap and handle the card carefully. 1. Before opening your workstation to install the graphics card, disconnect all power, peripheral, and telecommunications cables from the system. When referring to your system model/type and for obtaining the proper driver version, please use the AxxxxX nomenclature found on the Serial Number plate on the back of the machine. 2. Following the procedures described in your workstation's Owner's Guide, install the graphics board into the appropriate AGP Pro slot (see the system board slot diagram below). Slide the board into the slot, making sure the board is fully seated in the connector. Install Fire GL4 card in AGP Pro Slot Example system board 3. Connect the provided DVI-I to VGA converter from either card connector, then to your standard monitor cable. When connecting to a DVI digital flat panel monitor no converter is necessary. A7226- 90000