HP P5389A HP 2100S SCSI RAID - User Guide (337208-001) - Page 15
Environmental Specifications, Cache Memory, 2100S Features
UPC - 088698513354
View all HP P5389A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
About Your New Controller Environmental Specifications NOTE: Forced airflow is recommended but not required. • Ambient temperature (operating): 0°C to 50° C (32°F to 122°F) • Relative humidity (operating): 10% to 90% non-condensing • Altitude (operating): 3,000 meters (10,000 feet) Cache Memory IMPORTANT: You must have a minimum of 32 MB of cache installed. If ECC protection is required you must use ECC Cache Memory Modules or qualified memory from a manufacturer listed on the Adaptec Web site. Adaptec SCSI RAID controllers support up to 128 MB of cache SDRAM memory in the controller. If you use third-party memory in the controller, the memory must be 100 MHz SDRAM, 168-pin DIMMs. Capacities can be 32 MB, 64 MB, or 128 MB. Third-party ECC DIMMs must be from a qualified manufacturer. For a list of memory types and manufacturers that have been approved by Adapted, refer to www.adaptec.com 2100S Features Adaptec SCSI RAID 2100S controllers are designed to provide high performance solutions for workstations servers in environments where cost is a factor. • Type: Ultra160 SCSI • Host bus: 32-bit PCI • Host bus transfer rate: 132 MB/sec • I/O transfer rate: 160 MB/sec (Maximum supported transfer rate) HP 2100S SCSI RAID Controller User Guide 2-3