HP PL Class450/500/550/600/650/700/750 HP Visualize PL500, PL600, PL650, and P
HP PL Class450/500/550/600/650/700/750 Manual
View all HP PL Class450/500/550/600/650/700/750 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP PL Class450/500/550/600/650/700/750 manual content summary:
- HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 1
HP VISUALIZE Linux Workstation Owner's Guide PL-Class Workstations Printed in USA Manufacturing Part Number: A1296-90001 Edition E1299 © Copyright 1999 Hewlett-Packard Company - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 2
Legal Notices The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 3
IMPORTANT HP Linux/Year 20000 Warranty Information HP has made every effort to ensure the accuracy of our product testing. However, because each customer's environment is different from HP's laboratory test environment, it is the customer's responsibility to validate the Year 2000 readiness of - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 4
iv - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 5
Contents v - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 6
Setting an Administrator Password 15 Setting a User Password 16 Recycling an Old HP Workstation 18 Chapter 2 How to Install Accessories In Your HP Visualize Linux Workstation 19 Supported HP Accessories 21 Removing and Replacing the Cover 22 Removing the Cover 22 Replacing the Cover - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 7
Accessory Boards 47 Installing the Board 47 Installing a Processor 50 Installing Drivers and Utilities 53 Chapter 3 Troubleshooting Your HP Visualize Linux Workstation 55 Solving Problems 56 HPBIOS Summary Screen 56 HP MaxiLife 56 If Your Workstation Does Not Start Properly 57 Display is - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 8
105 Device Setup Menu 106 Exiting from the Configuration Utility 107 Chapter 5 Hewlett Packard Support and Information Services 109 Introduction...110 Your HP-Authorized Reseller 111 Hewlett-Packard Information Services 112 HP World Wide Web Site 112 Ordering Drivers and BIOS on Diskette 113 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 9
Three Year Limited Hardware Warranty 126 Limitation of Warranty 127 Obtaining On-Site Warranty Service 128 Customer Responsibilities 129 Obtaining Parts Warranty Service 129 HP Telephone Support Services 129 HP Software Product License Agreement and Software Product Limited Warranty 130 HP - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 10
x - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 11
Preface This owner's guide describes how to use your HP VISUALIZE Linux PL-Class Workstation. This Workstation features the Red Hat Linux Operating System, pre-installed by Hewlett-Packard. The PL-Class Workstation is designed to perform such tasks as locally executed IC design. It provides the - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 12
high-speed Intel Pentium processors and it supports up to 768MB of system memory. It is equipped with dual SCSI controllers, single or dual 9GB or 18GB internal discs, and the ELSA GLoria - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 13
when you see MaxiLife LCD messages. Audience This guide is intended for HP VISUALIZE Linux Workstation users who want to: • Set up the HP VISUALIZE Linux Workstation for the first time. • Configure the HP VISUALIZE Linux Workstation. • Troubleshoot problems on the HP VISUALIZE Linux Workstation. • Add - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 14
the Workstation before switching it on. To avoid electric shocks, do not open the power supply. There are no user-serviceable parts inside. This HP VISUALIZE Linux Workstation is a class 1 laser product. Do not attempt to make any adjustment to the laser units. Important Ergonomic Information It is - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 15
installed by computer-knowledgeable customers who carefully read and follow the instructions provided. Customers who elect to have the product installed by the manual is listed below: Edition Revision History E1299 Second Printing Problems, Questions, and Suggestions If you have any problems or - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 16
Documentation Conventions Unless otherwise noted in the text, this guide uses the following symbolic conventions. user-supplied values screen display Enter Italic words or characters in syntax and command descriptions represent values that you must - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 17
1 Setting Up and Using Your HP VISUALIZE Linux Workstation 1 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 18
you receive your Workstation, unpack all of the components: ˘ Computer and power cords ˘ Display and its video cable ˘ HP keyboard, mouse and headphones ˘ Manuals and CD-ROMs. 2. Place the Workstation on (or under) a sturdy desk with easily accessible power outlets and enough space for the keyboard - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 19
Setting Up and Using Your HP Visualize Linux Workstation Connecting the Mouse, Keyboard, Display and Printer Connecting the Mouse, Keyboard, Display and Printer Connect the mouse, keyboard, and display to the back of the Workstation. The connectors are shaped to go in one way only. Tighten the - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 20
Workstation has a 10BT/100TX LAN interface adapter. The LAN adapter supports both 10 Mbit/s and 100 Mbit/s operations and automatically detects (or into a wall socket that is connected to a hub). For further instructions on configuring your network connection, refer to the section "Configuring Your - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 21
Setting Up and Using Your HP Visualize Linux Workstation Connecting Audio Accessories Connecting Audio Accessories Your HP VISUALIZE Linux Workstation has a Headphone Out jack and a Microphone In jack on the Audio Front Panel (see the section "System Specifications" in the chapter "Technical - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 22
WARNING Setting Up and Using Your HP Visualize Linux Workstation Connecting Audio Accessories To avoid discomfort from unexpected noise, always turn down the volume before connecting headphones or speakers. Listening to loud sounds for prolonged periods may permanently damage your hearing. Before - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 23
0 to 15 for wide instructions on selecting a SCSI address. You don't need to set a SCSI address for Plug and Play SCSI devices (SCSI devices which support the SCAM protocol). 2. Make sure the SCSI accessory is terminated correctly-either internally or by a terminating resistor (refer to the manual - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 24
an External SCSI Accessory 3. Connect the SCSI accessory to your Workstation's external 16-bit SCSI connector with a shielded SCSI cable. NOTE 4. Refer to the manual provided with the SCSI accessory to learn how to install any software that may be necessary to use it. The total length of the - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 25
Setting Up and Using Your HP Visualize Linux Workstation Connecting the Power Cords Connecting the Power Cords 1. Remove any warning labels that may be covering the computer's power connector on the rear of the computer. 2. Connect the power cords to the display and the computer. (The connectors are - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 26
Display (LCD) support. Press one of the LCD control buttons to display the menu. Use to scroll through the menu items and to select the item required. For more information on using the LCD, refer to the section "Using HP MaxLife to Diagnose Problems" in the chapter "Troubleshooting Your HP - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 27
Setting Up and Using Your HP Visualize Linux Workstation Starting and Stopping Your HP Visualize Linux Workstation Starting and Stopping Your HP VISUALIZE Linux Workstation Starting Your Workstation for the First Time Your HP VISUALIZE Linux Workstation has preinstalled Red Hat Linux and HP software - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 28
Tool is running, you can complete the Warranty Registration card that came with this manual. 3. When you are finished entering information into the Setup Tool, click up diskettes, follow instructions that appear in the HP Linux Setup and Recovery Guide that was included with your Workstation. 12 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 29
, see the section "If a POST Error Message is Displayed" in the chapter "Troubleshooting Your HP Visualize Linux Workstation." If you have set a password in the Workstation's you stop the workstation without following these instructions, data loss or a damaged file system may result. Chapter 1 13 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 30
the Setup Tool and rebooting, your Workstation will launch a special "Getting Started" program (see above) that will provide access to several on-line documents and manuals. This program will guide you to additional information regarding the Red Hat and HP software. 14 Chapter 1 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 31
the existing password first. Then, for the new password, leave the password field blank and press . To confirm your choice, press a second time. Chapter 1 15 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 32
Workstation Setting BIOS Passwords If you forget your password, refer to the section "If You Have Forgotten Your Password" in the chapter "Troubleshooting Your HP VISUALIZE Linux Workstation." Setting a User Password A User password can only be set if an Administrator password has already been - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 33
confirm your choice, press a second time. If you forget your password, refer to the section "If You Have Forgotten Your Password" in the chapter "Troubleshooting Your HP VISUALIZE Linux Workstation." Chapter 1 17 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 34
Setting Up and Using Your HP Visualize Linux Workstation Recycling an Old HP Workstation Recycling an Old HP Workstation HP has a strong commitment towards the environment. This HP Workstation has been designed to respect the environment as much as possible. HP can take an old computer back for - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 35
2 How to Install Accessories In Your HP VISUALIZE Linux Workstation 19 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 36
How to Install Accessories In Your HP Visualize Linux Workstation This chapter explains how to install accessories, such as extra memory, accessory boards, and additional disk drives, in your Workstation. 20 Chapter 2 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 37
mentioned in this section reflect components that were not fully qualified with the Linux Operating System by HP at the time this manual was written. However, they are stated as being supported by Red Hat starting with Version 6.0. Contact HP or your dealer for an up-to-date list of - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 38
How to Install Accessories In Your HP Visualize Linux Workstation Removing and Replacing the Cover WARNING Removing and Replacing the Cover For your safety, never remove the Workstation's cover without first removing the power cord from the power outlet, and any connection to a telecommunications - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 39
How to Install Accessories In Your HP Visualize Linux Workstation Removing and Replacing the Cover 4. Lift the two latches on the front sides of the computer upwards. 5. Grasp the cover on the sides at the back of the computer and slide it forwards and off the computer. Chapter 2 23 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 40
front sides of the cover are lifted up, and that the lock is unlocked. 3. Slide the cover onto the computer, making sure that the two guides at the bottom of the case slide into the two rails at the base of the computer. Firmly slide the cover backwards into position. Press - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 41
How to Install Accessories In Your HP Visualize Linux Workstation Removing and Replacing the Cover 4. Lower the latches on the front sides of the cover. 5. If required, lock the cover using the key provided. 6. Reconnect all the power cables. Intrusion Monitor Your HP VISUALIZE Linux Workstation - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 42
(see the section "Removing and Replacing the Cover"). 3. Remove the fan connection to the system board. Fan connection to system board HP UltraFlow Airflow Guide Retaining button 4. Press the retaining buttons on each side of the HP UltraFlow airflow - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 43
How to Install Accessories In Your HP Visualize Linux Workstation Moving the Power Supply 5. Unscrew the four self-retaining screws at the back of the power supply. Unscrew the self-retaining screws WARNING To avoid electrical shock, do not open the power supply. 6. Slide the power supply out of - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 44
. Power Supply after Installing 2. Slide the power supply back into the computer. Accessories 3. Tighten the four self-retaining screws. 4. Replace the HP UltraFlow airflow guide. 5. Reconnect the fan to the system board. 28 Chapter 2 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 45
(see the section "Removing and Replacing the Cover"). 3. Remove the fan connection to the system board. Fan connection to system board HP UltraFlow Airflow Guide Retaining button Chapter 2 29 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 46
Linux Workstation Installing Memory 4. Press the retaining buttons on each side of the HP UltraFlow airflow guide and lift it out of the Workstation's case. 5. Remove the transparent airflow guide covering the processor sockets (if needed). 6. Remove the floppy disk drive data cable from the system - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 47
How to Install Accessories In Your HP Visualize Linux Workstation Installing Memory 9. Firmly press the memory module completely into the connector until the retaining clips click into position. 10. Repeat this procedure for each additional memory module you want to install. 11. Install any other - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 48
How to Install Accessories In Your HP Visualize Linux Workstation Installing Mass Storage Devices Installing Mass Storage Devices If you need extra mass storage space for your application software, you can install additional mass storage devices. The computer has two internal shelves (for hard disk - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 49
NOTE: these devices were not fully qualified by HP at the time this manual was written), you need to connect it to power and data cables. The storage devices: • A flexible disk drive cable with a single connector. This supports a flexible disk drive (the connector is attached to the flexible disk drive - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 50
board. • The Dual Ultra ATA-33 IDE controllers, on the PCI bus, support up to four fast (33 MB per second) IDE devices. • On selected models, the Ultra SCSI 16-bit interface board, installed in a PCI slot, supports up to 13 external SCSI devices and automatically switches to non-Ultra or standard - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 51
7 for Ultra narrow 8-bit SCSI and from 0 to 15 for Ultra wide 16-bit SCSI. SCSI address 0 is and Play SCSI hard disks (SCSI hard disks that support the SCAM protocol). You should assign an unused SCSI hard disk drive. Refer to the installation guide supplied with the drive for information on - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 52
fan connection to the system board (see the illustration on page 26). 4. Press the retaining buttons on each side of the HP UltraFlow airflow guide and lift it out of the Workstation's case. 5. Slide the power supply out to improve access to the internal shelf (see page 26). 6. Slide the - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 53
How to Install Accessories In Your HP Visualize Linux Workstation Installing Mass Storage Devices 7. Secure the drive with the four self-retaining screws. 8. Locate the appropriate data cable for the hard disk drive. IDE drives should be connected to a free IDE connector on the IDE cables (you can - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 54
fan connection to the system board (see the illustration on page 26). 4. Press the retaining buttons on each side of the HP UltraFlow airflow guide and lift it out of the Workstation's case. 5. Slide out the power supply to provide better access to the disk drive cables (see page 26 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 55
How to Install Accessories In Your HP Visualize Linux Workstation Installing Mass Storage Devices 6. Unscrew and remove an unused drive tray. Remove the drive tray 7. Mount the drive on the tray as shown below. Set the drive on the tray Fix the drive to the tray Chapter 2 39 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 56
How to Install Accessories In Your HP Visualize Linux Workstation Installing Mass Storage Devices 8. Slide the drive tray into the drive shelf and secure it. Slide the drive tray into the drive shelf 40 Chapter 2 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 57
How to Install Accessories In Your HP Visualize Linux Workstation Installing Mass Storage Devices 9. Locate the appropriate data cable for the disk drive. IDE drives should be connected to a free IDE connector on the IDE cables (you can add up to four IDE devices). Up to 13 external SCSI devices - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 58
Installing Mass Storage Devices 12. Replace the HP UltraFlow airflow guide and reconnect the fan to the system board (see the while the Workstation re- 3. If an error message appears, follow the instructions provided by the Error Message Utility. When prompted, press program. to run - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 59
drive) in one of the frontaccess drive shelves. You should also refer to the manual supplied with the drive for any additional installation instructions. Before Installing an IDE Device Refer to the drive's installation guide to see if you must set jumpers or if there is a special installation - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 60
How to Install Accessories In Your HP Visualize Linux Workstation Installing Mass Storage Devices If installing a drive in a 5.25-inch wide shelf, remove the drive tray and put it in a safe place. Remove the drive tray if installing a 5.25-inch drive Mounting Rails Secure the drive in position - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 61
How to Install Accessories In Your HP Visualize Linux Workstation Installing Mass Storage Devices Locate the appropriate data cable for the device. Flexible Disk DriveCable Up to 13 external SCSI devices can be connected to the external SCSI connector. IDE drives should be connected to a free IDE - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 62
How to Install Accessories In Your HP Visualize Linux Workstation Installing Mass Storage Devices Slide the power supply back into position, and tighten the four selfretaining screws (see page 26). Remove the plastic panel from the cover by pulling the panel from the left and unhinging its right- - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 63
CAUTION NOTE How to Install Accessories In Your HP Visualize Linux Workstation Installing Accessory Boards Installing Accessory Boards Static electricity can damage electronic components. Turn OFF all equipment. Don't let your clothes touch the accessory. To equalize the static electricity, rest - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 64
instructions detailed in their manuals. 1. Unscrew and remove the slot cover. Store it in a safe place. If the slot cover is tight, loosen the screws on the adjacent slots. Unscrew and remove the slot cover 2. Hold the board horizontally by its "top" edge. Slide it into the board guide - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 65
How to Install Accessories In Your HP Visualize Linux Workstation Installing Accessory Boards 3. Align the board's connector with the slot's socket. Firmly press the board into the socket. Ensure the board's connector engages completely with the socket and does not touch components on other boards. - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 66
a Processor NOTE Installing a Processor Some operating systems support a second processor for enhanced performance. Contact your authorized system board HP UltraFlow Airflow Guide Retaining button 4. Press the retaining buttons on each side of the HP UltraFlow airflow guide and lift it out of the - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 67
). VRM module Processor 2. Insert the VRM for the processor in the VRM socket. 3. Replace the transparent section of the HP UltraFlow airflow guide covering the processor sockets. 4. Slide the power supply back into the computer and tighten the four self-retaining screws. 5. Turn the Workstation - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 68
speed and processor speed. Refer to the manual supplied with the processor to verify which bus and processor speeds are supported. Switch Switch Switch Switch Switch Bus 66 MHz 400 MHz UP UP DOWN UP DOWN 66 MHz 450 MHz UP UP DOWN DOWN UP 66 MHz 500 MHz 1. UP=OFF, DOWN=ON. 2. Install any - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 69
drivers. To install the latest drivers or utilities for the HP VISUALIZE Linux Workstation go to the following web site: http://www.hp.com/visualize/support Chapter 2 53 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 70
How to Install Accessories In Your HP Visualize Linux Workstation Installing Drivers and Utilities 54 Chapter 2 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 71
3 Troubleshooting Your HP VISUALIZE Linux Workstation This chapter deals with problems you may encounter when using your Workstation. 55 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 72
Troubleshooting Your HP Visualize Linux Workstation Solving Problems Solving Problems This chapter can help you solve most problems you might have with your Workstation. If you are unable to solve your problem after following the advice in this chapter, refer to the chapter "Hewlett-Packard Support - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 73
Troubleshooting Your HP Visualize Linux Workstation If Your Workstation Does An error message and icon appears on the LCD screen (refer to the section "Using HP MaxiLife to Diagnose Problems"). Display is Blank and There Are No Error Messages If your display is blank and there are no error messages - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 74
Troubleshooting Your HP Visualize Linux Workstation If Your Workstation Does Not Start Install Accessories Inside Your HP VISUALIZE Linux Workstation." Verify that any switches and Refer to the manuals that came jumpers on the accessory with each board. boards are properly set. Check that the - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 75
Troubleshooting Your HP Visualize Linux Workstation If Your Workstation Does Not Start Properly Rebuild Your Workstation's Components LCD Error Messages Action Reference Temp disk Temp CPU Temp IO slot Check fans and that air flow guide which one is causing the problem. If you are Unable to - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 76
Troubleshooting Your HP Visualize Linux Workstation If Your Workstation Does Not Start Properly Clearing the Workstation's Configuration Memory • Press to ignore the message and continue. • - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 77
Troubleshooting Your HP Visualize Linux Workstation If Your Workstation Does Not Start Properly c. Turn on the Workstation. This will erase the CMOS memory. d. Wait until the - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 78
CAUTION Troubleshooting Your HP Visualize Linux Workstation If You Cannot Turn Off Your Workstation If You Cannot Turn Off Your Workstation Use this section if you cannot - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 79
the refresh settings to ensure they are not too high. Other Display Problems If the display image is not aligned with the screen, use the display's controls to center the image (refer to the display manual for instructions). If the screens generated by the applications do not appear to be correct - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 80
Troubleshooting Your HP Visualize Linux Workstation If Your Workstation Has a Hardware Problem standard is required. Also check your display manual to find out which refresh rate is required. Use your operating system's procedures, to select the correct refresh rate. If Your Keyboard Does Not Work • - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 81
Troubleshooting Your HP Visualize Linux Workstation If Your Workstation Has a Hardware Problem • Verify that you have application program's "print" menu has been correctly set up. (Refer to the manual supplied with the application software.) • Check that the Workstation's port is working properly - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 82
Troubleshooting Your HP Visualize Linux Workstation If Your Workstation Has a Hardware Problem If the Hard Disk power and data cables are correctly connected. If the CD-ROM Drive Has a Problem WARNING Be sure to disconnect the power cord and any telecommunication cables from your computer - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 83
Troubleshooting Your HP Visualize Linux Workstation If Your Workstation Has a Hardware Problem To avoid electric shock and harm to your eyes by laser light, do not open the CD-ROM drive enclosure. The drive should be serviced by qualified service personnel only. Refer to the label on the drive for - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 84
Troubleshooting Your HP Visualize Linux Workstation If Your Workstation Has a Hardware Problem No Sound from the CD-ROM Drive If you are having problems with sound when playing a CD: • Check that the volume control (if present) on the CD-ROM drive front panel is not set to the minimum. • - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 85
Troubleshooting Your HP Visualize Linux Workstation If Your Workstation Has a Hardware Problem The CD-ROM Drive Does not Open If you have difficulty removing a CD-ROM disk from the CD-ROM drive (during a power failure for example), you can use the manual eject button. To eject a CD-ROM disk using the - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 86
Troubleshooting Your HP Visualize Linux Workstation If Your Workstation Has a Hardware Problem If an Accessory Board Does not Work Carry out the following checks: • Check that the accessory board has been firmly installed in the slot. • Check - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 87
Troubleshooting Your HP Visualize Linux Workstation Using HP MaxiLife to Diagnose Problems Using HP MaxiLife to Diagnose Problems Your HP LCD can help you to diagnose problems with your HP VISUALIZE Linux Workstation, even when you are unable to get your system and monitor working properly. Note - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 88
POST Phase Troubleshooting Your HP Visualize Linux Workstation Using HP MaxiLife to Diagnose Problems Following these checks, the POST gured to: • Display the configuration details of your Workstation required to obtain support (System info.) • Indicate POST (Power-On Self Test) steps during the - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 89
Info. Boot Steps Diags Troubleshooting Your HP Visualize Linux Workstation Using HP MaxiLife to Diagnose Problems System information is displayed on display all POST steps the next time your Workstation is powered on. For support purposes, POST steps are shown as POST codes and displayed on the - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 90
Troubleshooting Your HP Visualize Linux Workstation Using HP MaxiLife to Diagnose Problems To continue viewing the test results of the other system components, press the control button. COMPONENT Next Fan CPU Next For example, if there is a problem with a fan, an alarm will sound and the - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 91
Troubleshooting Your HP Visualize Linux Workstation Recovering Your HP Visualize Linux Workstation's (for example, a system crash, etc.), refer to the HP Linux Setup and Recovery Guide. This manual, which is included with your Workstation, provides complete information on how to re-install or - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 92
Troubleshooting Your HP Visualize Linux Workstation Recovering Your HP Visualize Linux Workstation's Operating System 76 Chapter 3 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 93
4 Technical Information This chapter provides technical information about your HP VISUALIZE Linux Personal Workstation and includes information on the HP Setup program. 77 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 94
Technical Information Features Features Feature: Description: Processor (standard) Cache Memory (integrated in processor package) Main memory (size/speed) Video LAN Audio Disk drive controller Rear connectors 25-pin parallel connector Pentium III (single or dual) • Level-One: 16 KB code, 16 KB - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 95
2E8h (IRQ 3), 3F8h (IRQ 4), 3E8h (IRQ 4), or Off- (if one port uses 2xxh, the other port must use 3xxh). Seven mass storage shelves supporting: • Two front-access, third-height, 3.5-inch drives • Three front-access, half-height, 5.25-inch drives • Two internal 3.5-inch hard disk drives • One flexible - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 96
on the World Wide Web (refer to the section "HP World Wide Web Site" in the chapter "Hewlett-Packard Support and Information Services" for access details) in the support documentation section for your Workstation. IRQs, DMAs, and I/O Addresses The IRQ, DMA, and I/O address mappings shown here are - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 97
Technical Information System Specifications configuration. The resources used by your Workstation may vary, depending on which accessory boards are bundled with the Workstation. Resources are allocated by the system BIOS. IRQs used by Workstation IRQ0 IRQ1 IRQ2 IRQ3 IRQ4 IRQ5 IRQ6 IRQ7 IRQ8 IRQ9 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 98
Technical Information System Specifications I/O Addresses used by Workstation 0000 - 000F 0020 - 0021 002E - 002F 0040 - 0043 0060, 0064 0061 0070 0070 - 0071 0080 0081 - 0083, 008F 0092 0096 - 0097 00A0 - 00A1 00C0 - 00DF 00F0 - 00FF 0130 - 013F 0170 - 0177 01F0 - 01F7 0200 0220 - 0232 0278 - 027F - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 99
Dual Tune F DMA transfer on channel 0, 1, 2 or 3 • Automatic dynamic filtering for digital audio recording and playback • MPU401 compatible MIDI port • Support for Hardware and Software Wave table Synthesizer • Integrated OPL3® compatible music synthesizer • Built-in "Phat Stereo" for enlargement of - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 100
Microphone In jack • 20 dB gain preamplifier. The boost can be muted with software • 32-level programmable volume control • Input impedance: 600 ohms • Sensitivity: 30 mVpp to 283 mVpp Headphone Out jack • Impedance: 32 ohms SCSI Features Feature: Controller Description: • UltraWide 16-bit SCSI - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 101
Technical Information System Specifications UltraWide 16-bit SCSI (accessory board) • Based on Symbios Logic • 40 MB per second band width • 68-pin 16-bit internal connector (with 16-bit to 8bit convertor) • 68-pin 16-bit external connector • Automatic switching to non-Ultra for external SCSI - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 102
Technical Information System Specifications Network Features Feature: LAN Controller RJ45 Connector Remote Boot ExStart Connector Remote Power On Remote Wake Up Description: AMD PCNET-Fast Chip 10BT/100TX autonegotiation Protocols integrated in System BIOS • Connection to CPU board • LAN Remote - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 103
Serial Port Connectors: Port B (left)/Port A (right) 25-pin Parallel Port Connector Keyboard (right) and Mouse (left) Connectors MIDI/Joystick Connector 3.5 mm Audio jacks Chapter 4 15-pin VGA Display Connector (on video adapter board) 87 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 104
Technical Information System Connectors and Switches System Connectors and Switches System Board Connectors System Board Switches Fan (airflow guide) Power FDD Fan VRM 1 VRM 2 Processor 1 Status Panel MT LCD Panel Memory Modules Processor 2 AGP Slot PCI Slots ISA Slots External Start Wake - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 105
Technical Information System Connectors and Switches CD Audio Connector Auxiliary (AUX) Connector Internal Audio Connectors The Workstation's system board has several connectors that allow you to internally connect to other devices. This includes: • A CD audio connector • An auxiliary (AUX) - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 106
Technical Information System Connectors and Switches Audio Front Panel Connector The Audio Front Panel Connector, labeled "Audio Front Panel," is a 10-pin connector that links the system board with the multimedia Front Panel. This connector directs stereo output to either the front panel headphone - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 107
Technical Information System Connectors and Switches Refer to the on-line guide Using Sound, preloaded on your Workstation, for more information about the Replacing the processor with a different processor is not supported by HP. Switches 6 to 10 are used as shown in the following table: Chapter - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 108
Technical Information System Connectors and Switches Switch1 Use Switch to: 6 - CLEAR CMOS Retain or clear CMOS memory: • UP to retain CMOS memory - DEFAULT • DOWN to clear CMOS memory. 7 - PSWRD Enable or clear (and disable) User and System Administrator Passwords stored in EEPROM: • UP to - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 109
configure your HP VISUALIZE Linux Workstation and solve configuration problems with your Workstation. Viewing the HP BIOS Summary Screen Check the Workstation. Consult your operating system documentation for any special instructions concerning turning off and then restarting your Workstation. 2. While - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 110
Technical Information The HP BIOS Summary Screen and Setup Program 3. The opening screen of the Workstation's Setup program is displayed, similar to the following graphic. Note that the Main menu selection is highlighted. PhoenixBIOS Setup Utility Main Advanced Security Boot Power Plug & Play - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 111
Technical Information The HP BIOS Summary Screen and Setup Program Saving Your Changes and Leaving Setup When you have made all your changes, you must save them and exit Setup. 1. Press (twice if necessary) to enter the Exit menu. 2. Select Exit Saving Changes to save your changes and exit Setup. - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 112
Technical Information Configuring Your Network Connection Configuring Your Network Connection Use the information in this section if your HP VISUALIZE Linux Workstation comes with an HP-supplied integrated network solution. You must use the Workstation's Setup program (described on in the section " - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 113
Technical Information Configuring Your Network Connection Controlling the Network Security Features The Security Features allow you to enable starting from the network if you want the HP VISUALIZE Linux Workstation to start from a LAN server. To enable starting from the network: 1. With the Setup - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 114
Technical Information Configuring Your Network Connection 3. Use the and keys to select a boot device, and then press the or key to move the device up or down the list. You can also change the boot device order without entering Setup. Look for the prompting message when your Workstation first - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 115
settings which apply to individual devices. Settings for the Host Adapter and All Devices Default Settings SCAM Support Parity Host Adapter SCSI ID Scan Order Removable Media support On Enabled 7 Low to High (0-Max) None Settings for Individual SCSI Devices Synchronous Transfer Rate (MB/sec - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 116
NOTE Technical Information Using the SCSI Configuration Utility Starting the SCSI Configuration Utility You access the SCSI Configuration Utility by pressing when the message Press F6 to start Configuration Utility... is displayed during the Workstation's start-up routine. A further message is - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 117
Technical Information Using the SCSI Configuration Utility Adapter Boot Order Change Adapter Status Display Mode Mono/Color Help Quit This option is only available when you have more than one host adapter installed. It lets you set the order in which host adapters boot. When you select this option - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 118
Technical Information Using the SCSI Configuration Utility Adapter Utilities Menu When you select (click on and press ) a host adapter from the Main menu, the Utilities menu is displayed: Symbios Logic SCSI Configuration Utility Version 1.07 1. SYM53C875 Utilities Adapter Setup Device Selections - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 119
Setup. Exit this menu. On Enabled 7 Low to High (0.Max) Use arrow keys to select from menu. Then press ENTER BIOS Code Segment: C800 SCAM Support Parity The settings in this menu are global settings that effect the selected host adapter and all SCSI devices attached to it. The Symbios Logic - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 120
by the system.This will change the boot order. Removable Media Only used when removable disk drives are installed. For more Support information, refer to the User's Guide that came with you removable disk drive. CHS Mapping When performing a 'low format', CHS mapping should be set to Alternate - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 121
Yes Yes Dev5 N/A 40 16 On 10 Yes Yes Dev6 N/A 40 16 On 10 Yes Yes SYM53C875 40 16 On 10 Yes Yes Device Selections 8-15 Help. Exit this menu. Queue Tags Enabled Enabled Enabled Enabled Enabled Enabled Enabled Enabled Use arrow keys to select from menu. Then press ENTER BIOS - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 122
Technical Information Using the SCSI Configuration Utility Device Setup Menu When you select a device from the Device Selections menu, the Device Setup menu is displayed: Symbios Logic SCSI Configuration Utility Version 1.00 1. SYM53C875 Dev0 N/A Setup Sync Rate (Mega Bytes/sec) Width (bits) - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 123
lets you specify whether queue tags are enabled or disabled. In a multi-tasking environment this option must be enabled. It should only be disabled for troubleshooting. Format Disk This utility can be used to perform a low-level format of a hard disk. Most SCSI disks are pre-formatted and do not - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 124
Technical Information Using the SCSI Configuration Utility 108 Chapter 4 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 125
5 Hewlett Packard Support and Information Services 109 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 126
you many years of trouble-free service. To ensure that your desktop system maintains its reliability and to keep you up-to-date with the latest developments, HP and a worldwide network of trained and authorized resellers provide a comprehensive range of service and support options: • HP-Authorized - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 127
queries about usage not intended for, or not common for, the HP Workstation. Authorized HP Resellers can also offer consulting services tailored to your specific needs regarding product development or custom installations. Similar support services are offered by third parties or the HP Customer - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 128
also download the latest versions of drivers, BIOS and software utilities. The Access Guide Directory guides you through the information and services available. Service For product information: For service and support information: World-Wide Web URL http://www.hp.com/visualize/products/linux http - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 129
Hewlett Packard Support and Information Services Ordering Drivers and BIOS on Diskette Ordering Drivers and BIOS on Diskette If you have access to the DOS Operating System, you can order diskettes - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 130
Hewlett Packard Support and Information Services Ordering Drivers and BIOS on Diskette Australia Mail Fulfill: Plus Pty Ltd., Private Bag 75, Alexandria NSW Australia 2015 Asia - Pacific Mail Fulfill: - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 131
is available during the second and third years of hardware warranty, via the Lifeline program, which is a fee-based service. HP does NOT provide support for Workstations configured as network servers. We recommend HP NetServers for your network server requirements. Your HP-authorized reseller offers - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 132
Hewlett Packard Support and Information Services Hewlett-Packard Telephone Support Hewlett-Packard Telephone Support HP North Assistance from the HP North American Customer Support Center is American available Monday to Friday, 7:00 am to 6:00 pm Mountain time. Customer Support Center The - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 133
Hewlett Packard Support and Information Services Hewlett-Packard Telephone Support Country Spain Portugal Language Spanish Portuguese Local Number 902 321 123 01 441 7199 Please have the following information ready when you call so that - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 134
begins AFTER you have been put in contact with a support technician. If your problem is found to be covered by the HP Hardware Warranty, support center (+44 171 512 5202). Free access to HP information services is not affected by this service. You are encouraged to access HP Information Services - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 135
Hewlett Packard Support and Information Services Summary Service Basic Warranty Technical phone support Lifeline phone support Service Contracts Summary The table below summarizes the services and support available from HP or authorized resellers. Covers Period Response Fee covered time When - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 136
Support and Information Services Hewlett-Packard Marketing Headquarters Hewlett-Packard Marketing Headquarters Should you wish to contact Hewlett-Packard, check your local telephone directory for the HP Sales and Service Hewlett-Packard Prolongación Reforma No. 700 Col. Lomas de Santa Fe Del - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 137
A Regulatory Information and Warranty This section contains all Regulatory and Warranty Information. 121 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 138
according to ISO/IEC Guide 22 and EN 45014 - 2 kV Signal, 4 kV Power Lines US FCC Part 15, Class A Japan VCCI Class A Australia/New Zealand AS/NZS 2046.1/2:1992, AS/NZS 3548: European Contact: Your local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department HQ-TRE - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 139
Radio Frequency Interference Statement Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 140
Regulatory Information and Warranty Regulatory Information Canada: use a CSA certified detachable power cord. For your safety, never remove the PC's cover without first removing the power cord and any connection to a telecommunication network. Always replace the cover before switching on again. Si le - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 141
Japan Regulatory Information and Warranty Regulatory Information This equipment is in the Class B category information technology equipment based on the rules of the caused when used near a radio or TV receiver. Read the instructions for correct operation. Notice for Korea Appendix A 125 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 142
. Please, read it carefully. Warranty terms may be different in your country. If so, your Authorized HP Dealer or Hewlett-Packard Sales and Service Office can give you details. HP products may contain remanufactured parts equivalent to new in performance or may have been subject to incidental use - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 143
use by the original purchaser or provided as an incidental part of systems integrated by the original purchaser. When available in the country of use, service is provided in the same manner as if the product was purchased in that country and can only be provided in countries where the product - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 144
APPLICABLE TO THE SALE OF THIS PRODUCT TO YOU. Obtaining On-Site Warranty Service To obtain on-site warranty service, the customer must contact an HP Sales and Service Office (in the US, call the HP Customer Support Center at (970) 635-1000) or a participating Authorized HP Personal Computer Dealer - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 145
shall return some defective parts upon HP demand. In that case, HP will prepay shipping charges for parts returned to the HP parts service center. HP Telephone Support Services HP Free telephone support for your Personal Workstation is available during the first year from date of purchase. This - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 146
Regulatory Information and Warranty HP Hardware Warranty server requirements.(Rev. 17/03/98) HP Software Product License Agreement and Software Product Limited Warranty YOUR HP VISUALIZE PERSONAL WORKSTATION CONTAINS PREINSTALLED SOFTWARE PROGRAMS. PLEASE READ THE SOFTWARE LICENSE AGREEMENT BEFORE - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 147
Regulatory Information and Warranty HP Hardware Warranty sale of any rights in the Software, its documentation or the media on which they are recorded or printed. Third party suppliers may protect their rights in the Software in the event of any infringement. Copies and Adaptations. You may only - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 148
Software. HP warrants for a period of NINETY (90) DAYS after the date of purchase that HP software will not fail to execute its programming instructions, due to defects in material and workmanship when properly installed and used. If HP receives notice of such defects during the warranty period, HP - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 149
Regulatory Information and Warranty HP Hardware Warranty WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Appendix A 133 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 150
Regulatory Information and Warranty HP Hardware Warranty 134 Appendix A - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 151
B Physical Characteristics 135 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 152
8.27 inches by 16.30 inches). 0.09 m2 (0.95 sq ft). -40 ˚C to 70 ˚C (-40 ˚F to 158 ˚F). 8% to 80% (relative). 5 ˚C to 40 ˚C (40 ˚F to 104 ˚F). 15% to 80% (relative). (as defined ISO 7779) LwA - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 153
Index 137 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 154
SCSI connector, on system board 88 A accessories installing 19 supported 21 accessory board installing 47 activity light hard disk 10 connector, on system board 88 CD-ROM completing installation 46 troubleshooting 66 CD-RW troubleshooting 66 connecting display 3 keyboard 3 to network 4 connector - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 155
H hard disk activity light 10 troubleshooting 66 hard disk drive cables 37, 41 completing installation 42 installing 34 headphones connector 5 headphones jack impedance 84 Hewlett-Packard information services 112 marketing headquarters 120 support and information services 109 World Wide Web access - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 156
activity light 10 connecting to 4 features 86 RJ-45 connector 4 network configuration, setup 96 O Operating system recovery 75 P parallel port connector 3 password setting 15 PC Workstation rear connectors 87 troubleshooting 55 PCI slots, on system board 88 Personal Workstation features 78 140 - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 157
Self-Test (POST) screen 12 printer connector 3 installing 3 troubleshooting 64 processor installing 50 socket, on system board 88 R Recovery configuration utility 99, 107 SCSI features 84 serial port connector 3 setting password 15 Setup program 93 setup program 93 slot AGP, on system board 88 slots - HP PL Class450/500/550/600/650/700/750 | HP Visualize PL500, PL600, PL650, and P - Page 158
13 summary screen 93 support by telephone 116, 118 information services 109 summary of services 119 supported HP accessories 21 switches on technical specifications 77, 107 telephone support out of warranty 118 under warranty 116 tools required for installation 2 troubleshooting 55 CD-ROM 66 CD-RW
HP V
ISUALIZE
Linux Workstation
Owner’s Guide
PL-Class Workstations
Printed in USA
Manufacturing Part Number: A1296-90001
Edition E1299
© Copyright 1999 Hewlett-Packard Company