HP PSC 1200 HP PSC 1200 series all-in-one - (English) Reference Guide - Page 13

load originals and load paper 3 You can make copies from originals loaded on the glass. You can also print and copy onto a variety of paper types, weights, and sizes. It is important, however, that you choose the right paper and make sure that it is loaded correctly and not damaged. load originals You can copy or scan any original by placing it on the glass. Note: Some copy options, such as Fit to Page, will not work correctly if the glass and lid backing are not clean. For more information, see clean the glass and clean the lid backing on page 21. 1 Lift the lid and place the original face down on the glass in the front-left corner with the sides of the original touching the left and bottom edges. It is important to use the front-left corner when using the copy feature. lid Top edge of original 2 Close the lid. load letter or A4 size paper Following is the basic procedure for loading paper. There are specific considerations for loading certain types of paper, postcards, and envelopes. After you review this procedure, see tips for loading other types of paper in the paper tray on page 11, load envelopes on page 10, and load postcards, hagaki cards, or 4-by-6 inch photo paper on page 11. For best results, adjust the paper settings each time you change paper types or paper sizes. For more information, see set the paper type on page 13. 9