HP Pavilion 11-e000 Maintenance and Service Guide - Page 51
Remove the thirteen Phillips PM2.0×4.5 screws that secure the bottom cover to the top cover.
View all HP Pavilion 11-e000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
3. Release the ZIF connector (3) to which the power button board ribbon cable is attached, and then disconnect the power button board ribbon cable from the system board. 4. Remove the thirteen Phillips PM2.0×4.5 screws that secure the bottom cover to the top cover. Component replacement procedures 43
3.
Release the ZIF connector
(3)
to which the power button board ribbon cable is attached, and then
disconnect the power button board ribbon cable from the system board.
4.
Remove the thirteen Phillips PM2.0×4.5 screws that secure the bottom cover to the top cover.
Component replacement procedures
43