HP Pavilion 20-inch Displays V191 LV1911 W1971a W1972a W1952a W1972b LV2011 LV - Page 13
Connecting Monitor Cables, Connecting the Audio Cable Select Models
View all HP Pavilion 20-inch Displays manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Connecting Monitor Cables Connecting the VGA (Analog) Cable or DVI-D (Digital) Cable Use a VGA video cable or a DVI-D cable to connect your monitor to your computer. To use DVI, you must have a DVI-compliant graphic card. Connectors are located on the back of the monitor. Be sure the computer and monitor are turned off and unplugged. 1. To connect the VGA cable Connect one end of the VGA video cable to the back of the monitor and the other end to the VGA video connector on the computer. 2. To connect the DVI-D cable (provided with select models) Connect one end of the DVI-D video cable to the back of the monitor and the other end to the DVI-D video connector on the computer. You can use this cable only if your computer has a DVI compliant graphics card installed. The monitor DVI-D connector and cable are included. Figure 3-5 Connecting the VGA or a DVI-D cable - connector locations may vary NOTE: When using a VGA or DVI signal, you must connect your audio separately because a VGA or DVI signal converts only video data, not audio data. Connecting the Audio Cable (Select Models) Connect the built-in monitor speakers to the computer by using the audio cable as shown in the following illustration Figure 3-6 connecting the Audio Cables - connector locations may vary ENWW Connecting Monitor Cables 7