HP Pavilion 24-b100 Hard Drive Replacement Instructions 1 - Page 3

Replacing the hard drive 1. Orient the hard drive to match the orientation of the old hard drive--that is, which side is up and the position of the connector. Insert the hard drive into the drive cage (1), and then replace the four Phillips screws (2). 2. Insert the drive cage into the computer and slide the drive cage until it is seated (1). Attach the cable to the hard drive (2), and then replace the Phillips screw (3). 3. Align the rear cover with the computer and press it down until it snaps into place (1). Replace the two Phillips screws (2), and then replace the screw covers (3). 4. Position the top of the stand on the computer (1), and then replace the four hex screws (2). Rotate the stand downward (3). 854284-001 3