HP Pavilion 510-a100 Optical Drive Replacement Instructions 2 - Page 1

HP Pavilion 510-a100 Manual

Page 1 highlights

Optical Drive Replacement Instructions 854253-001 Before you begin Observe the following requirements before removing and replacing the optical drive. WARNING: Never open the cover with the power cord attached or power applied. You might damage your computer or be injured by the spinning fan blades. WARNING: Avoid touching sharp edges inside the computer. WARNING: Keep your hands away from the moving fan. WARNING: Keep fingers and tools clear of the fan when the power is applied. CAUTION: Static electricity can damage the electronic components inside the computer. Discharge static electricity by touching the metal cage of the computer before touching any internal parts or electronic components. Tools needed Phillips #2 screwdriver Small screws are easily lost. Remove screws over a surface that enables you to retrieve them if they fall. NOTE: Computer appearance and features may vary by model. Removing the optical drive 1. Disconnect the power cord and all attached cables from the back of the computer. 2. Remove the access panel by loosening the captive screw (1), sliding the access panel back, and then lifting it off the computer (2). 854253-001 1

  • 1
  • 2
  • 3

854253-001
1
Optical Drive Replacement Instructions
Before you begin
Observe the following requirements before removing and
replacing the optical drive.
WARNING
: Never open the cover with the power cord
attached or power applied. You might damage your
computer or be injured by the spinning fan blades.
WARNING
: Avoid touching sharp edges inside the
computer.
WARNING
: Keep your hands away from the moving fan.
WARNING
: Keep fingers and tools clear of the fan when
the power is applied.
CAUTION
: Static electricity can damage the electronic
components inside the computer. Discharge static
electricity by touching the metal cage of the computer
before touching any internal parts or electronic
components.
Tools needed
Phillips #2 screwdriver
Small screws are easily lost. Remove screws over a
surface that enables you to retrieve them if they fall.
NOTE
: Computer appearance and features may vary by
model.
Removing the optical drive
1.
Disconnect the power cord and all attached cables from
the back of the computer.
2.
Remove the access panel by loosening the captive
screw
(1)
, sliding the access panel back, and then
lifting it off the computer
(2)
.

854253-001