HP Pavilion Media Center m8200 Upgrading and Servicing Guide - Page 6
After Closing the PC, Removing the Side Panel, See Before Opening the PC
View all HP Pavilion Media Center m8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
3 Disconnect the modem/telephone cable, if present. WARNING: To reduce the risk of personal injury from electrical shock or hot surfaces, disconnect the power cord from the wall outlet, and allow the internal system components to cool before touching. 4 Disconnect the power cord from the electrical outlet and then from the PC. 5 Disconnect all other attached cables (such as the keyboard, mouse, and monitor). 6 Disconnect all external devices. Removing the Side Panel CAUTION: Static electricity can damage the electronic components of the PC or optional equipment. Ensure that you are discharged of static electricity by briefly touching a grounded metal object. After Closing the PC To avoid injury and equipment damage, always follow this procedure in this order after closing the PC: 1 Reconnect the power cord. WARNING: To reduce the risk of electrical shock, fire, or damage to the equipment, do not plug telecommunications or telephone connectors into the network interface card (NIC) (labeled as an Ethernet connector). 2 Reconnect the modem/telephone cable and all other attached cables (such as the keyboard, mouse, and monitor). 3 Reconnect external devices. 4 Turn on the PC and all peripherals such as the monitor. 5 If you installed an add-in card, install any software drivers supplied by the card manufacturer. 6 See "Before Opening the PC" on page 1. 7 Loosen the two thumbscrews on the right side of the back panel. The first time you loosen these screws, you may need to use a Phillips screwdriver. WARNING: Beware of sharp edges inside the chassis. 8 Slide the panel back about 2.5 cm (1 inch), lift it off the PC, and set it aside. NOTE: You do not need to remove the other side panel to replace the hardware listed in this guide. 2 Upgrading and Servicing Guide