HP Pavilion Touch 20-f300 Quick Setup Guide - Page 19
Speakers and sound, Internet access
View all HP Pavilion Touch 20-f300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Speakers and sound Symptom No sound is produced. Volume is very low or unsatisfactory. Possible solution 1. From the Start screen, type c, select Control Panel, and then select System and Security. 2. Under Action Center, select Troubleshoot common computer problems, and then select Troubleshoot audio playback. If you are using built-in monitor speakers, use the monitor front-panel Volume button to adjust volume. Use the front-panel buttons to enter the on-screen display (OSD) and ensure that audio is enabled and that the volume is set appropriately. Ensure that you connected powered (active) speakers and that they are turned on. Turn off your computer, and then unplug and reconnect the speakers. Ensure that the speakers are connected to an audio connector, not a Line In or headphone connector. To resume from Sleep mode, press the Sleep button (select models only), or press Esc. Unplug headphones if they are connected to your computer (or speaker system). Ensure that you connected the speakers to the Audio Out (lime green) connector on the back of the computer. (Additional audio connectors are used for multiple-channel speakers.) Detached non-powered speakers (speakers without a separate power source, such as batteries or a power cord) do not produce satisfactory sound. Replace the nonpowered speakers with powered speakers. Internet access Symptom Internet programs do not start automatically. Possible solution Log in to your ISP, and start the desired program. Speakers and sound 15