HP Pavilion dv2000 Drives - Windows Vista - Page 13

Removing an optical disc when running on battery or external power

Page 13 highlights

Removing an optical disc when running on battery or external power 1. Press the release button (1) on the drive bezel to release the media tray, and then gently pull out the tray (2) until it stops. 2. Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces. NOTE If the tray is not fully accessible, tilt the disc carefully as you remove it. 3. Close the media tray and place the disc in a protective case. ENWW Removing an optical disc when running on battery or external power 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17

Removing an optical disc when running on battery or
external power
1.
Press the release button
(1)
on the drive bezel to release the media tray, and then gently pull out
the tray
(2)
until it stops.
2.
Remove the disc
(3)
from the tray by gently pressing down on the spindle while lifting the outer
edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.
NOTE
If the tray is not fully accessible, tilt the disc carefully as you remove it.
3.
Close the media tray and place the disc in a protective case.
ENWW
Removing an optical disc when running on battery or external power
9