HP Pavilion dv7 HP Pavilion dv7 Entertainment PC - Maintenance and Service Gui - Page 100
and graphics subsystem, the graphics/heat sink contact
View all HP Pavilion dv7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
3. Remove the fan/heat sink assembly (2). Disconnect the fan cable (3) from the system board. NOTE: Due to the adhesive quality of the thermal material located between the fan/heat sink assembly and system board components, it may be necessary to move the fan/heat sink assembly from side to side to detach the assembly. NOTE: The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly and the system board each time the fan/heat sink assembly is removed. Thermal paste is used on the heat sink (1) and the processor (2). Thermal pads are used on the Northbridge contact (3) and Northbridge chip (4), the graphics/heat sink contact (5) and graphics subsystem chip (6), and graphics/heat sink contact (7) and capacitors (8). Replacement thermal material is included with all fan/heat sink assembly, system board, and processor spare part kits. Replacement thermal pads and thermal paste is also available in the Replacement Thermal Material Kit, spare part number 634433-001 90 Chapter 4 Removal and replacement procedures ENWW