HP Point of Sale rp5000 Computer Setup (F10) Utility Guide - Page 14

Computer Setup (F10) Utility Guide Computer Setup (Continued) Heading Option Description Security (continued) Password Options (This selection will appear only if a power-on password is set.) Allows you to: • Enable/disable network server mode. • Specify whether the password is required for warm boot (CTRL+ALT+DEL). ✎ This selection is available only when Network Server Mode is disabled. See the Desktop Management Guide for more information. Device Security Enables/disables Serial ports A, B, C, and D, parallel port, USB ports, system audio, and network controllers (some models). Save Master Boot Record Restore Master Boot Record Saves a backup copy of the Master Boot Record of the current bootable disk. ✎ Only appears if MBR Security is enabled. Restores the backup Master Boot Record to the current bootable disk. ✎ Only appears if all of the following conditions are true: • MBR Security is enabled. • A backup copy of the MBR has been previously saved. • The current bootable disk is the same disk from which the backup copy of the MBR was saved. Ä CAUTION: Restoring a previously saved MBR after a disk utility or the operating system has modified the MBR may cause the data on the disk to become inaccessible. Only restore a previously saved MBR if you are confident that the current bootable disk's MBR has been corrupted or infected with a virus. ✎ Support for Computer Setup options may vary depending on your specific hardware configuration. 10 www.hp.com Computer Setup (F10) Utility Guide