HP Presario 6000 Using the ATI All-In-Wonder Card - Page 2

To enable your TV and PC displays: 1 Click Start on the taskbar. 2 Click Control Panel. 3 Click Appearance and Themes, if it is present. 4 Double-click Display. 5 Click the Settings tab, and then click the Advanced button. 6 Click the Displays tab, and then select the TV option. 7 Click OK. Important: If the TV option is dimmed, your TV may not be connected to the PC properly. For the TV option to appear, you may need to restart your PC after you connect the video cables. Reinstalling the ATI Software Your PC is pre-installed with all the necessary ATI drivers and software to be able to use the ATI All-In-Wonder card. If you need to reinstall the ATI All-In-Wonder programs, refer to the Application Recovery information in the printed documentation that came with your PC. Getting Help The ATI All-In-Wonder card comes with an online user guide. This guide describes advanced features and provides information about using your TV, VCR, and other video input sources with your TV tuner card and remote control. To view the ATI Online User Manual, click Start on the taskbar, choose All Programs, ATI Multimedia Center, and then click MMC7. For instructions on how to set up your PC with your TV, refer to the ATI Online User Manual (ATI Multimedia Center 7.7 User's Guide) and the cable installation poster. For instructions on how to play DVDs or audio CDs on your PC, refer to the printed documentation that came with your PC. Note: A DVD-ROM drive is an optional feature.