HP Presario CQ62-100 Compaq Presario CQ62 Notebook PC and HP G62 Notebook PC - - Page 68
USB board, Remove the USB board
View all HP Presario CQ62-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Removal and replacement procedures USB board Description USB board Spare part number 595205-001 Before removing the USB board: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then disconnecting the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-7). 5. Remove the hard drive (see "Hard drive" on page 4-8). 6. Remove the memory module (see "Memory module" on page 4-10). 7. Remove the wireless module (see "Wireless module" on page 4-12). 8. Remove the optical drive (see "Optical drive" on page 4-14). 9. Remove the keyboard (see "Keyboard" on page 4-16). 10. Remove the top cover (see "Top cover" on page 4-19). 11. Remove the display assembly (see "Display assembly" on page 4-25). Remove the USB board: 1. Disconnect the USB board cable 1 from the system board. 2. Remove the Phillips PM2.5×60 screw 2 from the system board. 3. Lift the USB board 3 straight up to remove it from the computer. The USB cable is available with the cable kit using spare part number 595201-001 Reverse this procedure to install a USB board. 4-32 Maintenance and Service Guide