HP ProBook 6440b HP ProBook 6545b, 6540b, 6445b and 6440b Notebook PC - Mainte - Page 162
Some of the Computer Setup menu items listed in this may not be supported by your computer.
View all HP ProBook 6440b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Computer Setup Computer Setup menus The menu tables in this section provide an overview of Computer Setup options. ✎ Some of the Computer Setup menu items listed in this chapter may not be supported by your computer. File menu Select System Information Set System Date and Time System Diagnostics Reset BIOS security to factory default Restore defaults Ignore changes and exit Save changes and exit To do this ■ View identification information for the computer and the batteries in the system. ■ View specification information for the processor, cache and memory size, system ROM, video revision, and keyboard controller version. Set or change the date and time on the computer. Displays the following information: ■ System Information ❐ Identification information for the computer and the batteries in the system ❐ Specification information for the processor, cache and memory size, system ROM, video revision, and keyboard controller version ■ Start-up Test-Verifies the system components needed for starting the computer. ■ Run-In Test-Runs a comprehensive check on system memory. ■ Hard Disk Test-Runs a comprehensive self-test on any hard drive in the system. ■ Memory Test-Runs a comprehensive test on any memory installed in the computer. ■ Battery Test-Runs a comprehensive test on any batteries installed in the computer. ■ Error Log-Displays a log file if any errors have occurred. Restore the BIOS security settings to the factory default. Replace the configuration settings in Computer Setup with the original factory settings. (Hard drive mode, password settings, and security settings are not changed when you restore the factory settings.) Cancel any changes entered during the current session. Then exit and restart the computer. Save any changes entered during the current session. Then exit and restart the computer. Your changes go into effect when the computer restarts. Maintenance and Service Guide 5-15