HP ProBook 6565b HP ProBook 6565b Notebook PC - Maintenance and Service Guide - Page 51

Disconnect the display panel cable from the back of the display panel

Get HP ProBook 6565b PDF manuals and user guides View all HP ProBook 6565b manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

6. If it is necessary to replace the webcam module from the display enclosure, gently pull the webcam module away from the double-sided tape on the display enclosure (1), disconnect the webcam cable from the module (2), and then remove the webcam (3). 7. If it is necessary to replace the display panel, remove the six Phillips PM2.5×5.0 screws (1) at the bottom and two Phillips PM2.5×5.0 screws (2) at the top that secure the panel to the display enclosure. 8. Pivot the display panel upward until it sits at a 90 degree angle (3). 9. Disconnect the display panel cable from the back of the display panel (1). 10. Remove the four Phillips PM2.5×4.0 screws (2) that secure the display panel to the brackets. Component replacement procedures 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
6.
If it is necessary to replace the webcam module from the display enclosure, gently pull the
webcam module away from the double-sided tape on the display enclosure
(1)
, disconnect the
webcam cable from the module
(2)
, and then remove the webcam
(3)
.
7.
If it is necessary to replace the display panel, remove the six Phillips PM2.5×5.0 screws
(1)
at
the bottom and two Phillips PM2.5×5.0 screws
(2)
at the top that secure the panel to the display
enclosure.
8.
Pivot the display panel upward until it sits at a 90 degree angle
(3)
.
9.
Disconnect the display panel cable from the back of the display panel
(1)
.
10.
Remove the four Phillips PM2.5×4.0 screws
(2)
that secure the display panel to the brackets.
Component replacement procedures
43