HP ProDesk 600 Maintenance and Service Guide - HP ProDesk 600 G1 Tower, HP Pro - Page 51
Bezel blanks, Remove the bezel blank for the appropriate drive
View all HP ProDesk 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Bezel blanks Description Optical drive bezel blank Spare part number 732770-001 On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch drive bays that need to be removed before installing a drive. To remove a bezel blank: 1. Remove the access panel (Access panel on page 38) 2. Remove the front bezel (Front bezel on page 40) 3. Remove the bezel blank for the appropriate drive: ● To remove a 5.25-inch bezel blank, press inward on the retaining tabs that hold the bezel blank in place (1) then pull the bezel blank from the front bezel (2). NOTE: After removing the 5.25-inch drive bezel blank and installing a drive, you can install an optional bezel trim piece (available from HP) that surrounds the front of the drive. Bezel blanks 41