HP ProLiant BL495c Regular Firmware Updates Essential for Optimal Performance - Page 8
Updating Firmware Using The Offline ROM Flash Method, IMPORTANT, The HP Drive Key Boot Utility
View all HP ProLiant BL495c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
For more information on how to deploy firmware updates remotely, refer to the following URL: http://h18004.www1.hp.com/products/servers/management/im/index.html Back to Top Updating Firmware Using The Offline ROM Flash Method The Offline ROM Flash, as its name implies, is performed when the server is taken down for regular maintenance. Although the results will be the same, the Offline ROM Flash does not provide the same benefits of the new Online ROM Flash method. In addition, when upgrading remotely, the server administrator can only update one server at a time. There are two methods of performing an Offline ROM Flash. The firmware can be updated using a ROMPaq Diskette or using either the ROM Update Utility or the HP Smart Update Manager. IMPORTANT: Beginning with the Firmware Maintenance CD Version 7.50, the HP Smart Update Manager Utility has replaced the HP ROM Update Utility. All other firmware update methods, including Offline Systems ROMPaq and Online ROM Flash are unaffected and continue to be supported methods of flashing the System ROM. The Customer Notice, HP Smart Update Manager Utility Replaces HP ROM Update Utility on the Firmware Maintenance CD and Provides Enhancements for Upgrading Firmware on ProLiant Servers, provides information on the differences between the HP Smart Update Manager Utility and the HP ROM Update Utility and the upgrades and enhancements available in HP Smart Update Manager. Refer to the following URL to view this Customer Notice: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&objectID=c01039146 A ROMPaq is a floppy-disk based method of upgrade. The firmware is downloaded onto a floppy diskette and then the system is booted to the floppy drive. The ROM Update Utility is located on the Firmware Maintenance CD, or can be downloaded to a USB Drive Key using the HP Drive Key Boot Utility. Note: Hard Drive components can only be updated using the Offline method. Back to Top The HP Drive Key Boot Utility The HP Drive Key Boot Utility can format an HP Drive Key so that it can be used as a bootable device. The utility also provides the ability to load the ROM Update Utility on an HP Drive Key. After the ROM Update Utility has been installed, the Offline ROM Flash Smart Components can be downloaded to the drive key from the following URL and deployed using the ROM Update Utility: http://h18023.www1.hp.com/support/files/server/us/smartstartGP.html System ROM support is required for the HP Drive Key Utility. To determine server support, refer to the following URL: http://h18004.www1.hp.com/products/servers/platforms/usb-support.html For additional information on the HP Drive Key Boot Utility, refer to the following URL: http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00218060/c00218060.pdf