HP ProLiant DL185 HP ProLiant DL185 Generation 5 Server Maintenance and Servic - Page 65
Power Supply Unit (PSU
View all HP ProLiant DL185 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
2. Fasten the nine screws on the system board to secure the system board to the chassis. Figure 58 Installing the system board Power Supply Unit (PSU) Located on the rear panel of the server power supply is a standard autoranging 750-watt PSU with PFC (power factor correction) function. Figure 59 Power supply unit WARNING: Take note of the following reminders to reduce the risk of personal injury from electric shock hazards and/or damage to the equipment. • Installation of power supply units should be referred to individuals who are qualified to service server systems and are trained to deal with equipment capable of generating hazardous energy levels. • DO NOT open the power supply unit. There are no serviceable parts inside it. To remove the power supply: 1. Disconnect the power cable connecting the power supply and the motherboard. Contents 65